733815
18
Zoom out
Zoom in
Previous page
1/120
Next page
NR50 / English Instruction Manual
3
INSTALLATION
Unpack all parts and remove protective material.
Do not connect the unit to the mains before checking the main voltage and before all other
connections have been made.
Do not cover any vents and make sure that there is a space of several centimeters around
the unit for ventilation.
Connection
1. Plug in the AC cord to the AC outlet. Switch the unit to standby mode by turning on the Main
power switch. The unit will go to standby mode and the LCD display will dim light up.
2. Turn on the unit, if the LCD display is on with backlighting, it means the power supply is
normal. Now your system is ready to play the music.
Remark: Due to ErP stage two requirements and protect the environment. The unit will switch to
standby mode automatically once no any music playing over 15 minutes.
Setting the clock
1. Set the unit in standby mode.
2. Press the “Mem/Clk-Adj” button until display flashes “24HR”. Press the Skip Up or Skip
Down button to select the clock format between 12 or 24Hour. Then press the “Mem/Clk-
Adj” button.
3. The first digit of “0:00” is flashing on the LCD display. Press Skip Up or Skip Down
button to set the correct hour. Press “Mem/Clk-Adj” button to store the correct hour.
4. The third & fourth digit of “00” is flashing, press the Skip Up or Skip Down button to
set the correct minutes. Then press “Mem/Clk-Adj” button to store the correct minute.
The clock setting mode will automatically quit if no button is being pressed in a period of
about 5 seconds.
RADIO
Manual Tuning
1. Plug in the provided DAB/FM tuner antenna to the antenna socket then switch on the unit by
pressing the On/Standby button, then press Function button (2) to select “FM” mode.
2. Tune to the required station by tuning knob.
3. Turn the Volume knob to the desired volume level.
Auto tuning
1. Set the unit to FM mode.
2. Press the Scan button once; unit will start to scan at tuning up direct until radio station
received. Press and hold the Scan button for a second, the unit will scan to tuning down
direction. If the radio data system (RDS) broadcasting signal received, the unit will set the
actual time automatically.
3. Turn the Volume knob to the desired volume level.
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Soundmaster NR50 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Soundmaster NR50 in the language / languages: English, German, Dutch, Danish, French, Italian, Swedish, Spanish, Norwegian as an attachment in your email.

The manual is 3,63 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info