562121
9
Zoom out
Zoom in
Previous page
1/10
Next page
TROUBLESHOOTING
Troubleshooting
If a fault occurs, first check the points listed below before taking the set for repair.
Do not open the set as there is a risk of electric shock.
If you are unable to remedy a problem by following these hints, consult your dealer or service center.
WARNING: Under no circumstance should you try to repair the set yourself, as this will invalidate the warranty.
--Problem
Solution
No sound/power
- Volume not adjusted
Adjust the VOLUME
- Power cord not securely connected
Connect the AC power cord properly
- Batteries dead/incorrectly inserted
Insert (fresh) batteries correctly
Display does not function properly/
No reaction to operation of any of the controls
- Electrostatic discharge
Switch off and unplug the set. Reconnect after a
few seconds
Poor cassette sound quality
Dust and dirt on the heads,etc.
Clean deck parts etc., see maintenance
- Use of incompatible cassette types (METAL or
CHROME)
Only use NORMAL(IECI)for recording
Recording does not work
-Cassette tab(s)may be broken
Apply a piece of adhesive tape over the missing tab
space
No disc indication
- No CD inserted
Insert a CD, CD-R or CD-RW
- CD badly scratched or dirty
Replace/clean CD, see Maintenance
- Laser lens steamed up
Wait until lens has cleared
-CD-R is blank or the disc is not finalized
Use a finalized CD-R
CD playback does not work
-CD badly scratched/dirty
Replace/clean CD(see maintenance)
- Laser lens steamed up
Wait until lens has adjusted to room temperature
The CD skips tracks
- CD damaged or dirty
Replace or clean CD
- Program is active
Quit Program mode(s)
SPECIFICATION
Specifications:
Environmental information
We have done our best to redue the packaging and make it easy to separate into 3 materials: cardboard, paper pulp and
expandable polyethylene.
You set consists of materials which can be recycled if disassembled by a specialized company. Please observe the local
regulations regarding the disposal of packaging, dead batteries and old equipment.
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Soundmaster MCD7895USB at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Soundmaster MCD7895USB in the language / languages: English as an attachment in your email.

The manual is 0,55 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info