562113

Soundmaster MCD4850 Manual

7
Zoom out
Zoom in
Previous page
1/10
Next page
MCD4850 / English instruction manual
ENG 6
III) CASSETE RECRODING
1) Press the Tape button (16) to select “ Tape “ mode. Get the tape ready for playback.
2) Press “REC “ button (31) and then the CD “ play/pause ” button (24) at CD-2 until the play
indicator “ “ show on LCD display (2).
3) After few seconds, the LCD (2) will show the time counter and now the system is start recording
process. Now start playback of cassette tape which the track you prepare to record.
4) After completing of recording, press the “ Stop ” button (27) at CD-2 and then stop the playback of
the cassette tape.
IV) AUX-IN RECORDING
1) Press the /Aux button (19) to select ““ /Aux “ mode. Connect the headphone output at the
audio device (such as MP3 player, CD player etc) to the 3.5mm aux-in jack (29) via a 3.5 mm
connecting cable (not provided).
2) Repeat the same procedures from step 2 to 4 as described on other recording model from above.
3) Adjust the volume output level at your audio player device if the recording level is too high.
REMARK:-
- The recording speed is 1:1 and according to the actual plying time of the playing source
- To suspend the recording process, press the “ play/pause ” button (24) at CD-2, “ bUSY “ briefly
appear on LCD and the recording is in pause. To re-start, press again the “ play/pause ” button
(24).
B) RECRODING SETTING
I) RECORDING LEVEL
The preset recording level of the system is lower than original music source in order to avoid distortion
during recording except Aux-in recording mode
.
II
) TRACK SEPARATION (BY MANUAL)
You can divide the recording music track by track during recording anytime. When press the “ Track
Separate “ “ button (22) once during recording at any mode, the system will generate a new track
and continuous the recording. The word “ bUSY “ will briefly show on LCD display (2), it mean the unit is
creating a new track successfully
.
III
) FINALIZE A CD-R(W) DISC
You must convert the CD-R(W) disc into standard CD before playing at other audio CD player. This
process is knows as finalizing and a table of contents (TOC) will write to the CD on the same time:-
1) Set the function mode at “ CD-2” and place the CD-R(W) disc you are going to finalize.
2) Press the Finalize button (8) at the stop mode. “ FIN-d “ appears on the LCD display (2). (press the
“ stop ” button to quite finalize mode if necessary)
3) Press the “ Play/Pause ” button (24) to start finalizing and the LCD (2) will show “ bUSY “ during
the process.
4) After completion, the CD door will open automatically and the “ NO TOC “ indicator will disappear from
LCD (2).
REMARK:-
- The time for finalizing is subject to the contents of recorded and it may take up to 15 minutes in some
cases.
- No button is working during finalize process.
- Never turn off the power or un-plug the power cord during finalize process.
- The CD-R disc cannot be record again after finalizing.
- Although finalized CD-R disc may be played on ordinary CD players, remember that finalized CD-RW
disc may not play on ordinary CD players.
- Owing to the variance of the compatibility of CD-R or CD-RW disc from the market. Please
change to other one if you find the recording performance of existing one is not up to
satisfaction. This is not the malfunction of the system.
- Owing to the variance of the compatibility of CD-R disc from the market. Please change to
other one if recording can not perform. This is not the malfunction of the system
… 7 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Soundmaster MCD4850 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Soundmaster MCD4850 in the language / languages: English as an attachment in your email.

The manual is 0,84 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Soundmaster MCD4850

Soundmaster MCD4850 User Manual - German - 9 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info