562125

Soundmaster MCD-9700 Manual

9
Zoom out
Zoom in
Previous page
1/11
Next page
Programmed track selection
You can set your CD Player to play a preset selection of tracks.
1. Press the
so the CD is not playing then press the PROG button. The LCD display will show 00
P- 00. The first two digits 00 are where the selected track number is entered, P-00 Is the program
counter which will increment after a track is entered.
2. Press either
or buttons until the required track number is shown. The LCD displays the
selected track and the program counter which has incremented to P-01.
3. Press the PROG button again, the LCD will now display 00 P-02 and is ready for another track to
be entered.
4. Repeat steps 2 and 3 above until all the tracks are stored.
5. To clear a program so the program counter is reset to 00 P-00 press the
button.
6. To play the programmed tracks press the
button.
7. When playing a program you can skip through the programmed selection using the
and
buttons.
8. After all the programmed tracks have been played, the CD player stops automatically and your
programmed selection is cleared.
Note: There can be up to a maximum of 20 tracks stored, the same track can be stored more than
once.
Repeat disc play
You can set your CD player to repeat a single track, the whole CD or your programmed selection
of tracks.
To repeat a single track during play mode:
1. Press either
or buttons to select the track you wish to repeat. The LCD display shows the
selected track and the track will play.
2. Press the REPEAT button until the LCD display shows ‘Repeat One track’ The selected track will
play continuously until you press the
button.
3. To cancel the repeat function and to continue playing the CD press the REPEAT button until the
LCD display shows ‘Repeat Off’.
To repeat a single track during stop mode:
1. Press either
or buttons to select the track you wish to repeat. The LCD display shows the
selected track.
2. Press the REPEAT button until the LCD display shows Repeat One track.
3. Press the
button to start repeat single play.
To repeat the entire CD during play mode:
1. Press the REPEAT button until the LCD display shows ‘Repeat All Track’. The entire disc will play
continuously until you press the
button.
2. To cancel the repeat function and to continue playing the CD press the REPEAT button until the
LCD display shows ‘Repeat Off’.
To repeat the entire CD during stop mode:
1. Press the REPEAT button until the LCD display shows ‘Repeat All Track’.
2. Press the
button to start repeat entire play.
To repeat a programmed selection:
Select your programmed tracks as described previously.
1. Whilst the programmed selection is playing press the REPEAT button until the LCD display shows
Repeat All. The programmed tracks will play continuously until you press the
button.
2. To cancel the repeat function and to continue playing the CD press the REPEAT button until the
LCD display shows ‘Repeat Off’.
7
… 9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Soundmaster MCD-9700 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Soundmaster MCD-9700 in the language / languages: English as an attachment in your email.

The manual is 0,35 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Soundmaster MCD-9700

Soundmaster MCD-9700 User Manual - German - 12 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info