673323
11
Zoom out
Zoom in
Previous page
1/60
Next page
FUR5005 / English Instruction Manual
3
1. Use alarm and setup it
Rotate the middle big button Alarm off / AL1 / AL1+2 / AL2 (3) point to AL1
Press and hold Setup (4), and turn right rotate knob Set (2) to set hour.
Press Setup (4) to confirm, and turn right rotate knob “Set” (2) to set minute.
Press Setup (4) to confirm, and turn right rotate knob Set (2) to choose the Alarm
mode is “bp” = Buzzer or e.g. 87.5” = radio (the last used frequency is
shown).
Press Setup” (4) to confirm, and turn right rotate knob “Set” (2) to set the alarm
volume.
Press Setup (4) to confirm, and turn right rotate knob Set (2) to choose the alarm
cycle:
1-7 (all days), 1-5 (workdays), 6-7 (weekends), or 1…2…3… to 7 (single day)
Press Setup (4) to confirm and exit the setting.
Default snooze time is 9 minutes.
Same operate to set AL2.
Rotate the middle big button Alarm off / AL1 / AL1+2 / AL2 point to AL1+2 which
can set AL1 and AL2, set way same as separate AL1 or AL2.
2. Using Sleep timer
When press “ Sleep” (5) button once, show icon (sleep), device will turn on radio
and start countdown since 120 minutes, if want to change the value, press “Sleep
(5) key once within 3 seconds , press each to decrease every 5 minutes .
When sleep timer running, press and hold “Sleep” (5) key to stop it.
3. Using NAP timer
When press “ NAP” (8) button once, show icon (NAP), device will turn on NAP timer
and start countdown since 120 minutes, once timer end, device will output buzzer
sound immediately ,press “ NAP” (8) to stop the sound. If want to change the value,
press “NAP” (8) key once within 3 seconds, press each to decrease every 5 minutes.
When NAP timer running, press and hold the “NAP” (8) key to stop it if necessary.
4. Using Date View
At standby or FM mode, press Setup (4) once key to show the date on display,
press twice show the year, press three times to show the day.
5. Manual start Time update
When device work on clock mode
Press and hold right rotary knob “Clock update” (2) once to activate RDS time
update function, Icon (Update) flashing
Press “Clock update” (2)once again to exit the function.
6. Dimmer & Dimmer Timer (DT)
At the anytime unless during alarm active, press SNOOZE/DIMMER(7) will
change status of brightness of display circulate.
Device Dimmer Timer default to be On, if want to change to be Off, go to next
section Setup up device for advance (DT ON = display will be dimmed from 23 to
6o clock automatically)
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Soundmaster FUR5005 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Soundmaster FUR5005 in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian as an attachment in your email.

The manual is 4,15 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Soundmaster FUR5005

Soundmaster FUR5005 User Manual - English - 6 pages

Soundmaster FUR5005 User Manual - German - 5 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info