611462

Soundcraft Vi 6 Manual

314
Zoom out
Zoom in
Previous page
1/337
Next page
Soundcraft Vi Series™ User Guide 1112 Page 25 - 7
Setting the HiQnet Node Address
Before enabling HiQnet, use the HIQNET ADDR Vistonics control to set a suitable HiQnet node address
for the console. The HiQnet node address can be any number in the range 1 – 65,535 but it must be a
unique number within the network in order to avoid conicts with other HPro devices.
You will need to use System Architect to nd out what the node addresses of other equipment are to
ensure there are no conicts. The Vi node address will be set to a default value of 2717 unless it has been
changed previously, and may be left at this address as long as this is not already being used elsewhere in
the network.
To set the HiQnet address, press the button within the HiQnet Address Vistonics control (see screenshot on
previous page). A keyboard will be opened which will allow the default address to be edited.
Note that it will take up to 10 seconds for the new address to appear after the Enter button on the
keyboard is pressed, and the console will be unresponsive during this time –this is normal.
Once the IP address is set and the HiQnet node address has been conrmed as unique in the network,
you can enable the HiQnet functionality by pressing the ON button in the far
left Vistonics control.
Enabling HiQnet will cause all the Vistonics controls in the section to change
from greyed-out to orange. A list of information relating to the current HiQnet
setup including a green ‘OK’ indicator is now displayed on the left side of the
HiQnet Setup page, indicating a healthy connection.
… 314 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Soundcraft Vi 6 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Soundcraft Vi 6 in the language / languages: English as an attachment in your email.

The manual is 10,69 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info