611462
293
Zoom out
Zoom in
Previous page
1/337
Next page
Soundcraft Vi Series™ User GuidePage 23 - 28
D21m System
6-34 D21m Modules Date printed: 30.08.07
6.3.10 EtherSound
®
Card (please contact www.digigram.com for further details)
The EtherSound
®
card allows connecting the Vi console to an Ether-Sound®
network. From the desk's viewpoint, it acts in a similar way to a MADI card
combined with a GPIO card. The number of audio channels used can be
con gured with DIP switches. The included, virtual GPIO card allows, e.g.,
routing a GPO of the mixing console to the GPO of a distant EtherSound
®
device on the network. Con guration of the EtherSound
®
network is per-
formed either through the ETH CTRL connector or from a remote location on
the EtherSound
®
network, e.g. using the EtherSound
®
EScontrol software.
The EtherSound
®
card works with EtherSound
®
ES-Giga System Transport
networks or with EtherSound
®
ES-100 Audio Transport networks. The operat-
ing mode of the card (ES-100 or ES-Giga) is selected by setting jumper J22
(see opposite page). The selected mode will be displayed on the front panel
LEDs.
The audio clock of the EtherSound
®
network must be synchronous with the
Vi consoles audio clock. This is ensured either by using the Ether-
Sound
®
card as clock source of the EtherSound
®
network, or by feeding the
device that is actually the EtherSound
®
network clock source with a word
clock synchronous with the Vi console’s audio clock.
The card is available for both Local Rack and Stagebox.
Current consumption (5 V) 750 mA max.
Operating temperature 0...40° C
ES*
In
Ethersound
Audio Framer/Deframer
Ethersound Controller
Backplane Connector
Ch
Number
Selector
DIP
Switch
ES*
Out
ES*
Ctrl
up to 64 Ch**
up to 64 Ch**
Sync
8 × GPI**
8 × GPO**
* For more information on network topology and possible connections, please
refer to the Ethersound documentation (www.ethersound.com
).
** GPIs are GPOs on the Ethersound network, and vice versa. Audio outputs are
audio inputs on the Ethersound network, and vice versa.
EtherSound® CARD
Note: only available via Digigram distribution network. Please contact www.digigram.com for further details.
293


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Soundcraft Vi 6 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Soundcraft Vi 6 in the language / languages: English as an attachment in your email.

The manual is 10,69 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info