611462

Soundcraft Vi 6 Manual

274
Zoom out
Zoom in
Previous page
1/337
Next page
Soundcraft Vi Series™ User Guide Page 23 - 9
D21m System
D21m Modules 6-11Date printed: 30.08.07
Input / output impedance 110 Ω
Input sensitivity min. 0.2 V
Output level (into 110 Ω) 5 V
SFC range 22...108 kHz
Current consumption (3.3 V) 1.949.422: 0.2 A; ..423: 0.4 A; ..424: 0.6 A
(5 V) 0.65 A
Operating temperature 0...40° C
Input SFC*
Enabled
Bypassed
*
1.949.423 and 1.949.424 only
**
1.949.424 only (see Note 1)
Ch 1
Ch 2
Ch 3
Ch 4
Ch 5
Ch 6
Ch 7
Ch 8
Output Word Length**
24 Bit 20 Bit
18 Bit 16 Bit
Output Sampling Rate**
Ch 4
Ch 3
Ch 8
Ch 7
Ch 6
Ch 5
Ch 2
Ch 1
Ch 5...8
Ch 1...4
Ch 5...8
96 k Ext.
Output SFC**
Bypassed
Enabled
Ch 1...4
48 k 44.1 k
LEDs: LOCK 1...8 These green LEDs are on if a valid AES/EBU signal is available at the
inputs.
Jumpers:
Input SFC Enabling or bypassing of the SFCs for individual AES/EBU input channels.
Output Sampling frequency (1.949.424 only) The output sampling frequency may be set for the AES/
EBU output channel groups 1...4 and 5...8; selection from 44.1 kHz, 48 kHz,
96 kHz, or synchronized by the signal at the AES EXT SYNC IN connector
(see “Note” above).
If no valid signal is provided at the AES EXT SYNC IN connector but Ext.
is selected, the output sampling frequency will be set to the system clock.
Outputs set to Ext. can therefore be used in a very exible way: Connect no
external sync signal, if not necessary, so that the output will be clocked with
the internal system clock. As soon as an external sync signal is provided to
the AES EXT SYNC IN connector, the output will be clocked with the ext.
sync signal.
Output SFC / WL Reduction (1.949.424 only) Enabling/bypassing of the output SFCs, separate for the
AES/EBU output channel groups 1...4 and 5...8. Please note that for word
length reduction the output SFCs must be set to Enabled.
… 274 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Soundcraft Vi 6 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Soundcraft Vi 6 in the language / languages: English as an attachment in your email.

The manual is 10,69 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info