611462
47
Zoom out
Zoom in
Previous page
1/337
Next page
Soundcraft Vi Series™ User Guide 1112 Page 3 - 7
GANG
General
Gang is a very helpful feature to speed up operations that inuence functions on multiple input channels,
or on output busses, in the same way.
For example, if Input Channels are ganged, then a parameter change of a function will be applied to all
other ganged channels in an offset manner. For example, adjusting any rotary parameter or fader within
a gang will add that offset to, or subtract it from, all other channels in the gang. Pressing a switch will
change all other channels whose switches are not currently in the resulting state, to that state. From that
point on, further presses will result in all switches changing mode together.
Creating A Gang
* Activate the GANG Mode with [GANG], the [GANG] key will glow blue (see Figure 1-4 for the
location of the [GANG] key).
* Add/remove a channel by pressing channel’s [SOLO/SEL] key. The [SOLO/SEL] becomes blue
if the channel is in the gang.
* ADD/Remove a range by pressing the rst and last channel [SOLO/SEL] together.
Switching-Off Gang Mode
Once a Gang has been created, it can be de-activated by switching the [GANG] key off. The
[SOLO/SEL] keys will return to normal solo operation. The Gang will be stored however, and can
be re-activated for further use at any time. Gang member settings are independent of the con-
sole’s snapshot automation, but are stored when the console is powered off.
Clearing A Gang
* Press and hold any active (blue) [SOLO/SEL]
or
* Leave the GANG mode with [GANG].
Gang All Input Channels
* Press and release [GANG] to switch Gang mode on, and then press and hold [GANG] until all
of the Input [SOLO/SEL] keys turn blue. This selects all channels (including hidden layers) to the
gang. When all of the Inputs are Ganged their [SOLO/SEL] keys turn blue.
Entering Gang Mode does not cancel any solos of any type that are active at the time. The Solo
system continues to work as it was when Gang Mode was switched ON. The amber ‘Solo’ illumi-
nation of the Solo/Sel switches cannot be seen whilst gang mode is ON.
It is recomended that Gangs are cleared down after use, particularly if GANG ALL is used.
47


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Soundcraft Vi 6 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Soundcraft Vi 6 in the language / languages: English as an attachment in your email.

The manual is 10,69 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info