611459
20
Zoom out
Zoom in
Previous page
1/225
Next page
Vi5000/7000 User Manual
4.3: Vi STAGE BOX
®
4.3: Vi STAGE BOX
HARDWARE > Vi STAGE BOX
The 9U Vi Stagebox houses 64 mic/line inputs and 32 analogue line outputs. Mic/line amp gain, 48 V phantom power
and 100 Hz lo-cut lter before the A-D converters can all be controlled remotely from the desk. The Stagebox is availa-
ble in Standard 64/32 conguration, or can be recongured as part-tted or with alternative cards as required.
The Stage Box contains 12 Slots for 6U-high Audio I/O Cards, a GPIO/LED Card and the MADI HD Card which con-
tains the Stage Box-to-Local Rack connection. Slots are labelled from left to right A-L, and the connectors on the cards
are numbered from top to bottom 1-8. These labelling references are used by the patching system (see chapter 11)
when the user wishes to patch the connectors to input channels or output busses.
The primary power supplies and an additional cooling fan with lter can be found on the rear panel.
Primary power supply
The primary power supply connects directly to the IEC inlet and provides a full range AC inlet, converting 100V to
240V ac to 24V DC. The Stage box is tted with two power supplies, providing redundancy for those that require it
Redundant MADI Cable Operation
The system can be used with either a single cable connected to the MAIN or AUX ports (usually MAIN), or, for
additional security
, two cables can be used to provide fully-automatic redundant operation. The 3-position INPUT SEL
toggle switch on the Stagebox MADI card determines the mode of operation.
For single cable operation: the switch must be set to either ‘MAIN’ or ‘AUX’, depending on which socket is being used.
For dual redundant operation: the switch MUST be set to the ‘RED’ position.
In redundant mode, the system will automatically switch to the other cable if a fault is detected on one cable. Note that
it will then stay on the second cable even if the connection is restored on the rst cable. This is to prevent intermittent
switching.
For More information of available Stageboxes, cards, and so on, please see Appendix 1 at the end of this
manual.
20


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Soundcraft Vi 5000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Soundcraft Vi 5000 in the language / languages: English as an attachment in your email.

The manual is 18,62 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info