611461
324
Zoom out
Zoom in
Previous page
1/337
Next page
Soundcraft Vi Series™ User Guide 1112 Page 25 - 17
FAQ 3: My HUB 4000 Q has wrong network settings!
-
Open Network Troubleshooter
at System ArchitectsRibbon/Tools/Network/Network Troubleshooter and
follow the instructions.
-
If the Network Troubleshooter doesn’t help open Readdress Devices
at System Architects – Ribbon/Tools/Network/Readdress Devices
-
The Readdress Devices panel is opened. There you can configure your devices
network settings.
-
If all of your HUB 4000 Qs are powered on and connected to the HiQnet
network and no HUB 4000 Q is shown in the list at the Readdress Devices
panel, your HUB 4000 Q has no network connection to System Architect
(detection of devices needs up to 60 seconds).
-
Please follow these steps:
o
On the right side of the HUB 4000 Q, behind the AKG logo, a DIP switch
can be found which changes the IP address negotiation. Set the DIP
switch to the following setting:
ON
DIP 1, 4: ON - DIP 2, 3: OFF
o
Power cycle the HUB 4000 Q (Switch the Power OFF and ON)
o
Wait till the 8 slot LEDs went from the left and right side to the middle
and back again periodically.
o
Set the DIP switch to the following setting:
ON
DIP 1, 2, 3, 4: OFF
o
Now the HUB 4000 Q starts first with trying to find an IP address with
DHCP. If the HUB 4000 Q doesn’t get an IP address over DHCP (if no
DHCP server is connected to your HiQnet network) the HUB 4000 Q tries
to get an IP address with AutoIP (IP range 169.254.1.1 to
169.254.254.255 with a subnet mask 255.255.0.0)
The data LED is blinking periodically every second.
All slot LEDs are off.
The address negotiation can take up to 5 minutes.
April 2011 Page 3
HUB4000Q–FAQ
324


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Soundcraft Vi 4 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Soundcraft Vi 4 in the language / languages: English as an attachment in your email.

The manual is 10,69 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info