611461
265
Zoom out
Zoom in
Previous page
1/337
Next page
Soundcraft Vi Series™ User GuidePage 22 - 4
MADI Card Settings for additional Stageboxes
The MADI cards on the Vi4 and 6 contain a DIP switch setting which has to be set differently depending on
whether the card is to be used for a Stagebox, or as a simple MADI connection for recording. This setting is
necessary because the messages that the card sends out in order to communicate with a stagebox need
to be disabled if the card is used to feed a device such as a hard disk recorder, otherwise this can cause
problems.
When the consoles are shipped, the rst MADI card (left-hand position) is set for Stagebox detection, and
the second MADI card (right hand position) is set for Hard Disk recording.
If you want to add another Stagebox and connect this to the second MADI card, the DIP switches on the
second card will have to be changed to enable Stagebox detection, as described below.
Checking and Resetting the DIP switches
Remove the optical MADI card from the console, observing anti-static handling procedures.
Locate the required DIP switch using the picture below. The switch has text adjacent to it saying ‘96k AUX
USAGE’.
Use a small implement to change the settings of S2 and S3 on this DIP switch as follows:
Stagebox Detection enabled Recording Mode (S/Box detection disabled)
S2 OFF ON
S3 OFF ON
All other switches should be left in the OFF position.
NOTE: the DIP switch is tted upside down in relation to
the text on the pcb – ensure the correct switch numbers
are changed (the numbers and ‘ON’ position are marked
on the switch body, but are very small).
See picture on the right:
265


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Soundcraft Vi 4 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Soundcraft Vi 4 in the language / languages: English as an attachment in your email.

The manual is 10,69 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info