611461
252
Zoom out
Zoom in
Previous page
1/337
Next page
Soundcraft Vi Series™ User Guide 1112 Page 20 - 21
BSS® Graphic Equalisers
The Vi Series uses a total of 35 high-quality BSS® Graphic Equalisers (GEQ).
Each of the 32 Busses and the three Main Masters are equipped with a 30-band Graphic Equalizer from
BSS®. The overall Q of the graphic EQ is adjustable from 4 to 6 in 0.5 steps, to allow a narrower or wider
bandwidth of the lers as desired. Narrower bands are better for feedback tuning, while wider bands are
more suited to room equalisation.
To access any of the GEQs rst press the [ALL BUSSES] key.
A touch on the <GEQ Field> opens the GEQ VST Page and changes the Fader Glow colour of the rst 30
Faders to red, this is known as ‘LARGE’ mode.
It is also possible to have a ‘SMALL control mode where the GEQ is scrolled across only 8 faders to leave
input faders available, see page 23.
The rst 30 Faders are labelled (small label) in the LCD display with the GEQ Frequencies, and control the
Gain of the individual bands. The range of control is +/- 12dB. The cut/boost value of the band is shown
in the LCD display and in the Vistonics section when a fader is touched and while being adjusted.
Hint: when a fader is moved away from its default 0dB position, the [ON] key above the fader
glows red. Pressing a red [ON] key will reset the fader to the 0dB position.
Figure 21-17 shows an example of the top part of one of the input bay screens.
Figure 21-17: Top Part Of A Graphic EQ Page.
Alternatively, solo an output bus in the Control Bay ( ensure that [LOCK MTR] os not ON). This brings up
the Output Channel Strip on the Control Bay Vistonics™ screen (see Figure 21-18). Touch the <GEQ> eld
of the Output Channel to access the GEQ on the faders, as described above.
252


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Soundcraft Vi 4 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Soundcraft Vi 4 in the language / languages: English as an attachment in your email.

The manual is 10,69 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info