611458
173
Zoom out
Zoom in
Previous page
1/202
Next page
Vi3000 USER MANUAL
®
17.1 17.1: FX > USING THE FX
17.1: FX > USING THE FX
To patch an FX unit as an Aux send destination, you must rst select either the output or the insert point of the chosen
Aux master. A fast way to get to the aux channel strips is to press the [All BUSSES] button. See the Outputs reference
chapter 7 for more options).
If you use the insert point of the aux bus you can then patch the output of that aux directly to the master LR bus, for
example. Once assigned as an insert, you will be able to edit the select FX unit directly by touching the FX block in the
output channel’s touch screen channel strip.
If you patch the main output of the aux bus to the input of an FX unit, you then need to select an input to patch to the
output of that FX unit.
Each FX processor can be patched in three ways. Aux Masters can be patched to the inputs of FX units; input channel
inputs can be patched to the outputs of FX units; and both input and output insert points can be patched to FX units.
Patching status is visible in the FX overview page, though actual patching of FX units takes place in the relevant
source / destination channel strips. For example, to patch an FX unit to an input channel you would go to that input
channel’s channel strip (input block).
So, to use an FX unit in a traditional aux send / return setup you would patch an aux output to the inputs of an FX unit,
then patch an input channel to the outputs of the same unit.
As well as the VST {tap tempo} button, the console’s F-Keys can be assigned to the tap tempo function (see below for
details).
Using The Lexicon FX Processors
As An Aux Send
173


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Soundcraft Vi 3000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Soundcraft Vi 3000 in the language / languages: English as an attachment in your email.

The manual is 17,4 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info