Manual Soundcraft Vi 3000 (page 138 of 202) (English)

611458

138

Zoom out

Zoom in

1/202

4.3: INPUT CHANNEL > DYNAMICS

Vi3000 USER MANUAL

4.3 INPUT CHANNEL > De Esser

Vi3000 USER MANUAL

14.4.2 14.4.2: SNAPSHOT FILTER > GLOBAL FILTER

14.4.2: SNAPSHOT FILTER > GLOBAL FILTER

14.4.2: Global Filter - Snapshot & Show Isolation

Isolate [ISO]

Select channels, groups

of channels, and

parameter blocks, and

individual parameters

to be part of the Global

Filter.

To quickly Isolate a whole channel or bus from the snapshot recall, press its [ISO] button.

The channel strip border on the Vistonics screen changes to purple to indicate the 'All

Isolated' state. To quickly isolate groups of channels or busses, the Gang function can be

used.

To isolate parts of a channel or buss you can use either the [ISO] button, or put the whole

desk into Global Edit mode.

With an [ISO] button held, simultaneously touch the part of the channel strip that you want

to isolate, in the touch screen. A purple LED appears in the top corner of the block to

indicate that the block is isolated. To isolate an individual parameter, touch the Vistonics

controls for the parameters you want to isolate. You can either zoom into the function block

before selection, so the parameters within that block are already mapped onto the VST

area, or touch and hold a screen block as well as the [ISO] button - that will zoom into the

parameters for the block.

Global Filter

Enable Active

Activate Global Filter

With the Global Filter activated, 'ISO' selected channels

and parameters will be isolated from snapshot recall.

Global Filter-

ing Enabled

Global Filter

Edit Mode Inactive Active

Activate Global Edit

mode.

All desk parameters are available for adding to the Glob-

al Filter, without having to hold down an [ISO] button.

Normal Oper-

ation

Mode ena-

bled

Load ISO With

Show Active

Enable or disable

Global Filter for Show

When set to YES the console ISO settings will be

cleared and overwritten by loading a new Show le. Set

this to NO to protect isolated sections of the console

from being overwritten by a new Show le.

Show Filter-

ing Enabled

To get manual control back while in a sequence of cues - either of a whole channel, groups of channels, or an element

within a channel, you can use Global Filtering. The console [ISO] buttons are the main tools for this. Once a parameter

is isolated, that parameter will remain under manual control regardless of which desk snapshot is recalled – hence the

term Global lter; however, controls that are isolated can still be stored, so you can update snapshots with the manu-

ally adjusted changes at any time.

To isolate channels, busses, or parts of channels and busses you can use either the [ISO] button, or put the whole

desk into Global Edit mode.

The Global edit lter (LOAD ISO WITH SHOW) can also be used to isolate aspects of the console’s set-up from entire

Show loads. So for example, if you have an engineer who brings a pre-congured show le to a shared console at a

festival, you can isolate the console’s output settings, which would normally be congured specically for the venue,

and protect them from being over-written by the new Show le.

The Global Edit button puts the whole desk into Edit mode so you don’t have to hold the [ISO] button.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Soundcraft Vi 3000 in the language / languages: English as an attachment in your email.

The manual is 17,4 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Soundcraft Vi 3000 Manual

Product: