611458
111
Zoom out
Zoom in
Previous page
1/202
Next page
4.3: INPUT CHANNEL > DYNAMICS
Vi3000 USER MANUAL
®
4.3 INPUT CHANNEL > De Esser
Vi3000 USER MANUAL
®
13.1 13.1: EDIT > COPY, PASTE, UNDO
13.1: EDIT > COPY, PASTE, UNDO
13.1: Copy, Paste, Undo
Ranges of channels or busses, individual channels or busses, processing blocks (eg EQ), or even individual param-
eters (eg mic gain control) within a processing block can be copied to the clipboard then pasted to another channel,
block, or range. This includes the console’s internal Lexicon FX units.
The last paste operation can be quickly reversed with the UNDO function.
Copy Options
• Put the console into Copy mode.
• Copy A Channel Or Bus Master
In copy mode, select or deselect a full input channel or output bus by pressing its [SEL] Key. Select a range by holding
the [SEL] Key of the rst Channel and pressing [SEL] of the last Channel. When a whole channel or range of channels
are selected, the grey Channel border is replaced with a yellow border.
Some parameters or process blocks are not included with a channel or bus copy by default, but most can be added
to the copy by selecting them individually (see below). The only ones that CANNOT be added are the Insert Point and
Direct Output settings.
Parameters not included with a whole input channel copy but that CAN be added individually are: Input 1/2 switch,
Input 1 & 2 patch, Mic Input Gain and all associated switches (48V, PAD, Phase Inv etc), Fader and Mute, VCA & Mute
Group Assignment, FX settings.
Parameters not included with a whole bus copy but that CAN be added individually are the output patch and FX set-
tings.
Copy A Block
Select or deselect a function block by touching that block’s Touch eld. Indication that a whole function block is select-
ed is shown with a wide yellow indicator in the top left corner of the eld.
Copy A Paramter
Select a single parameter by touching the corresponding Rotary encoder or by pressing the small key to the left of the
encoder. To make access to parameters easy while in Copy mode, enter the ‘Zoom’ mode with a long press on a touch
eld. Alternatively you can enter the Zoom mode, before you activate Copy mode by pressing the touch eld in the
normal way and entering Copy mode.
A selected parameter is indicated with yellow text in the Parameter Label. Note that not all parameters can be selected
individually; in some cases a set of parameters will automatically be selected when one of the set is touched.
If only a set or a single Parameter from within a block is selected then a small yellow indicator is displayed.
Copy, Paste,
and Undo Active
Put the console into
Copy mode.
Used for selecting channels, processing blocks, and
parameters and copying them to the clipboard. In copy
mode, the console [SEL] keys illuminate in blue to indi-
cate their function as selects rather than as Solos.
Copy Mode
Active
111


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Soundcraft Vi 3000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Soundcraft Vi 3000 in the language / languages: English as an attachment in your email.

The manual is 17,4 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info