611458
89
Zoom out
Zoom in
Previous page
1/202
Next page
Vi3000 USER MANUAL
®
9.2 9.2: MUTE & VCA GRPS > VCA GROUPS
9.2 MUTE & VCA GRPS > VCA GROUPS
VCA Groups conguration is started by pressing the MUTE & VCA GROUPS [SETUP] button. When you press a VCA
Master [SOLO/SEL] button you can assign channels to that VCA group with their individual [SOLO/SEL] buttons, and
also access VCA group options - including labelling - in the Master Bay Vistonics. See below for more information.
You can select EITHER output chanels OR input channels to be part of a normal VCA group.
In order to assign VCAs, the VCA masters [SOLO/SEL] buttons have to be made available by selecting the appropri-
ate Master Bay Fader Pages layer - [VCA] for VCA masters 1-8, or [E] for VCA masters 9-16.
VCA Master level at setup
The assignment of VCAs should be done with the channel or group faders and the VCA master, to which assignment
is being made, being at or near a nominal operating level. That is, don’t assign a VCA master to a channel or group if
the VCA master is at -40dB while the channel or group is at 0dB. There are 0dB buttons for VCA masters avilable in
VCA group conguration mode.
VCA Group Operation
VCA and 'E'
Buttons Active
Fader Pages buttons for
mapping VCAs to the
Master Bay faders.
The [VCA] button maps VCA masters 1-8 to the eight
Master Bay faders. The [E] button maps VCA masters
9-16 to the eight Master Bay faders.
VCA Masters 1-16 can be assigned to any Output Fader
page from A to E, along with Bus Output faders using the
User Dened fader page setup. The VCA page cannot
be remapped and always contains VCA 1-8.
Select VCA
Range
VCA Masters
[ON] Buttons Inactive Active
Master On/Off button for
all of the VCA's member
channels.
If a channel that was previously on is turned off by the
action of a VCA Master [ON]/Off button, the channel’s
[ON] button will illuminate in red to distinguish this condi-
tion from a manually 'off' channel.
The VCA Master On/Off switch itself has only 2 states,
and always illuminates red when off, and green when on.
All VCA
Members
OFF (muted)
All VCA Mem-
bers ON
VCA Group
Fader Low Range
An offset dB level for
all channels that are
members of the VCA
Group.
• When a VCA master fader is moved, the contributing
channel fader levels remain unchanged.
• If a channel is assigned to more than one VCA Group,
the resultant offset applied to the channel is calculated
as the arithmetic sum of the dB values of each VCA
Master.
Any VCA master fader reaching –innity dB (fader at
lowet position) will set all member channels to –innity
dB, regardless of other Master fader settings.
• The maximum gain applied to a member channel as the
result of the channel fader setting plus offsets from VCA
Master faders is limited to +10dB.
-innity
VCA Master
Solo/Sel Inactive Active
A master Solo button for
all of the VCA's member
channels.
Depending on the setting of the AUTO button in the
Monitor Setup page (SOLO section), activating a VCA
Solo will result in PFL (if the group only has one member
channel) or AFL (if the group has more than one member
channel).
Otherwise the VCA solo will follow the setting of the PFL/
AFL switch in the Monitor Setup page.
Normal Soloed
89


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Soundcraft Vi 3000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Soundcraft Vi 3000 in the language / languages: English as an attachment in your email.

The manual is 17,4 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info