611458
85
Zoom out
Zoom in
Previous page
1/202
Next page
Vi3000 USER MANUAL
®
8.0 8.0: MATRIX
8.0: MATRIX
Instead of a simple Output matrix, the console has a built-in, freely-congurable matrix that can have up to 16 Outputs
(mono or stereo) with full processing including parametric EQ, dynamics, delay, and graphic EQ. Each matrix output is
a mix of up to 24 congurable sources that can be signals from busses, channel direct outputs, or inputs directly from
the patching system.
The sources for each matrix mix can be individually patched, so the matrix can be utilized as 16 different mixers, each
with up to 24 inputs, with output processing.
In order to use a matrix, the output bus must rst be conggured as a matrix output. This can be done easily either via
All-Busses Mode (press the [All BUSSES] button in the Input Fader Pages section) or by touching the relevant meter
group in the Master Bay touch screen. In this case, the buss masters and assignments will be mapped to the right-
hand input bay.
Matrix Control
To map matrix contributions to the input bays, rst endsure that the [ALL BUSSES] key is NOT selected, then Press
the [SOLO/SEL] on a matrix master. All the input bays will change to the matrix contributions view and Faderglow™
illuminates with the matrix colour (cyan).
Press the Matrix source ‘+’ Vistonics button in one of the input screens above the fader you wish to use for the source. This opens
a patching screen that allows the source to be chosen from the categories on the right side of the screen: MADI, Stagebox, Local,
Direct Out or Bus Out.
Once the source is selected, its level to the matrix bus out will be controlled by the channel fader and [ON] button. With some types
of source (Direct and Bus Out) is is possible to choose the point in the signal path of the source channel or bus from where the feed
to the Matrix bus will be taken.
Monitoring Matrix
85


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Soundcraft Vi 3000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Soundcraft Vi 3000 in the language / languages: English as an attachment in your email.

The manual is 17,4 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info