611458
39
Zoom out
Zoom in
Previous page
1/202
Next page
4.3: INPUT CHANNEL > DYNAMICS
Vi3000 USER MANUAL
®
4.3 INPUT CHANNEL > De Esser5.7 5.7 Operations Overview > Gangs
®
Vi3000 USER MANUAL
5.7 Operations Overview > Gangs
5.7: Gangs
Gang is a very helpful feature to speed up operations that inuence functions on multiple input channels, or on output
busses, in the same way. Any parameter change on ganged channels will be applied to all other ganged channels as
an offset. For example, adding 4dB of level to an aux send on one channel will add 4dB of level to the the correspond-
ing Aux sends on all other ganged chanels - it will not ‘copy’ the actual level to the other ganged channels.
Button presses will change any corresponding buttons in ganged channels that are not currently in the new state, to
the new state. From that point on, further presses will result in all switches changing state together.
Gang mode is activated and deactivated with the [GANG] button. You add or remove channels to or from the gang with
the channel [SOLO/SEL] buttons.
Entering Gang Mode does not cancel any solos of any type that are active at the time. The Solo system continues to
work as it was when Gang Mode was switched ON. The amber ‘Solo’ illumination of the Solo/Sel switches cannot be
seen whilst gang mode is ON.
Gang Button Field / Group: Inactive Active
Activate or deactivate
Gang Mode.
After activating Gang Mode, hold the [GANG] button
down to Gang all channels.
You can leave Gang Mode pressing the [Gang] button.
If you haven’t ‘cleared down’ the gang then it will be
restored the next time you re-enter Gang Mode.
Normal Gang Select
Select (Gang) Field / Group: Active
Select and deselect
ganged channels.
When in Gang Mode you can add single channels by
pressing individual channels' [SOLO/SEL] buttons OR
you can add a range of channels by pressing the rst
and last channels' [SOLO/SEL] buttons together.
Press & Hold any [SOLO/SEL] button to clear down the
entire gang (recommended after use to avoid accidental
operation of Gang mode).
When in a gang, a channel’s [SOLO/SEL] button will
glow blue.
Select
Channel
39


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Soundcraft Vi 3000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Soundcraft Vi 3000 in the language / languages: English as an attachment in your email.

The manual is 17,4 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info