611458
25
Zoom out
Zoom in
Previous page
1/202
Next page
Vi3000 USER MANUAL
®
4.2 4.2: Hardware > DANTE / MADI Sources
4.2: Hardware > DANTE / MADI Sources
Syncing with Dante equipment
Detailed setup of Dante network is beyond the scope of this User Guide (see user-guide documentation for Dante
Controller software for more details), but it important to understand the concept of synchronisation within a Dante net-
work, even if there are only two devices in the network. In any audio network there must be one device acting as clock
master, the others are then slaves. In the Dante network, this device is known as the Primary Master. There can also
be secondary masters - these are devices that are normally slaves but will take over the role of Master clock should
the designated Master fail or be disconnected from the network. The status Primary/Secondary Master/Slave must be
set for each device, including for the Vi3000, using external Dante Controller software - it cannot be done from within
the console’s software. (Note: The Vi3000’s Dante interface is set as factory default to act as Primary Master).
The status of the Vi3000’s clock cong must be setup to work correctly with the Dante interface, depending on whether
the console is acting as Master or Slave on the network:
Console acting as Primary Master Select INT 48kHz clock in Menu-Sync page of console. Check ‘Slave to ext
wordclock’ in Dante Controller software for Vi3000 Dante interface
Console acting as Slave on Dante
network.
Select DANTE external clock in Menu-Sync page of console. Check ‘Slave to
ext wordclock’ in Dante Controller software for Vi3000 Dante interface.
Note: The option ‘Slave to External Wordclock’ in Dante Controller software is confusingly named as far as Vi3000 is
concerned, it actually refers to whether the Dante interface itself within the Vi3000 is locked to an ‘external’ clock - in
this case meaning the INTERNAL w/clock of the Vi3000 itself. If the Slave to Ext Worclock box is NOT checked, then it
means the Dante I/F will sync to network clock, ie the clock of the Primary Master.
See Chapter 16: Main Menu, Sync page for further info.
25


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Soundcraft Vi 3000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Soundcraft Vi 3000 in the language / languages: English as an attachment in your email.

The manual is 17,4 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info