611453
212
Zoom out
Zoom in
Previous page
1/221
Next page
Soundcraft Vi1™ User Guide Issue 0810Page 21 - 2
from Chan 16 to Chan 1 in the case of RX, (or from OUT1:1 to OUT1:16 in the case of TX). This is of
particular value in the case of the Device ID list, which has a values range from 0 to 127 (127 is displayed
as ALL and cannot have its name edited).
Global VST encoders
These encoders are not related to the above Channel Lists. They are located immediately below the lists in
order to keep the space on the left clear for future additions.
MIDI IN: The blue area of the screen controls parameters relating to MIDI input.
ON button: works as a global enable buttons for the MIDI IN – when this button is off, no reception is
possible from the MIDI IN.
GLOBAL RX CHAN VST encoder:
Sets the Global Receive MIDI Channel for the console. This channel can be referenced by the Cue List MIDI
RX Channel parameter.
The Global receive channel may also be used in the future for functionality where the console needs to
receive MIDI messages that are not associated with the Cue List triggering.
The value set here can nevertheless be selected from within the Cue List MIDI page as one of the available
receive channels.
Values range : Off, 1-16, Omni. (Omni mode means receiving on all channels).
Default value: Omni
GLOBAL RX DEVICE ID VST encoder : Sets the Global Receive MID Device ID for the console.
This Device ID can be selected in the Cue List MIDI In page as one of the Device IDs for the MSC ‘Goto
Cue’ trigger messages.
This may also be used in the future to allow a Device ID to be set for the console in case MMC or MSC
commands need to be received by the console in future functionality which is not associated with
triggering Cues.
Values range : Off, 0-127.
Default value : 127
GLOBAL TIMECODE On/Off VST encoder: Enables or disables the reception of MIDI Timecode. The MIDI
Timecode can be set as a trigger for Cues, but if this parameter is set to Off, it will not be possible to recall
any Cues with MTC, even if the individual Timecode On/Off switches in each Cue are set to On.
GLOBAL TIMECODE FRAME RATE VST encoder: Allows the frame rate for the internally set values for
transmitted and received MIDI Timecode to be set. The frame rate of the incoming timecode timecode for
cue triggering is automatically detected.
The frame rate parameter only affects the Frames parameter values range of any Timecode entry elds on
the desk (ie: EDIT Cue Number eld touched, and EDIT MIDI eld touched and a MMC Locate TX event set
up).
Values range : discrete values of 24, 25, 30 fps.
Default value : 25
TC Display {ON} key. When switched on, the incoming MIDI timecode value and its automatically detected
frame rate is displayed instead of the show name on the main page in the control bay screen.
MIDI OUT: The red area of the screen controls parameters relating to MIDI output.
212


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Soundcraft Vi 1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Soundcraft Vi 1 in the language / languages: English as an attachment in your email.

The manual is 6,37 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info