611453
209
Zoom out
Zoom in
Previous page
1/221
Next page
Soundcraft Vi1™ User Guide Issue 0810 Page 20 - 19
BSS® Graphic Equalisers
The Vi1 uses a total of 27 high-quality BSS® Graphic Equalisers (GEQ).
Each of the 24 Busses and the three Main Masters are equipped with a 30-band Graphic Equalizer
modelled on the FCS-960 from BSS®.
To access any of the GEQs rst press the [BUSSES 1-16] or [BUSSES 17-24] key.
A touch on the <GEQ Field> opens the GEQ Page and changes the Fader Glow colour of the8 output
section faders to red.
The 8 output section faders are labelled with the GEQ Frequencies, and control the Gain of the individual
bands. The range of control is +/- 12dB.
Hint: when a fader is moved away from its default 0dB position, the [ON] key above the fader
glows red. Pressing a red [ON] key will reset the fader to the 0dB position.
Alternatively, solo an output bus in the Control Bay. This brings up the Output Channel Strip on the upper
left quadrant of the screen. Touch the <GEQ> eld of the Output Channel to access the GEQ on the faders,
as described above.
When a <GEQ Field> is touched, the master bay’s screen appears as shown here.
There are two controls available on this screen:
FLAT ALL
{FLAT ALL} set the Gains of all 30 bands to 0 dB
GEQ {IN}
GEQ {IN} switches the GEQ on. The colour of the graph in the <GEQ Field> of the output in question
changes to red when it is switched on.
209


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Soundcraft Vi 1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Soundcraft Vi 1 in the language / languages: English as an attachment in your email.

The manual is 6,37 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info