611450
81
Zoom out
Zoom in
Previous page
1/84
Next page
Ui12, Ui16 User Manual
APPENDIX 01: NO SOUND?
NO SOUND? A TROUBLESHOOTING GUIDE
APP01: NO SOUND?
Is the Gate shut?
It is possible for an incorrectly set Gate process to stop all signal.
This happens most often when the threshold is set too high and the signal never gets loud enough to 'open' the Gate. You can easily
check this by bypassing active Gates in the dynamics (DYN) tab of the channel EDIT page.
Are there any active mutes?
The Ui allows you to mute channels individually, via Mute Groups, or via MUTE ALL and MUTE FX buttons the in
the DASHBOARD.
Mute Group operation is described in section 6.1.
Is the Fader up?
The channel fader needs to be set high enough when routing to any post-fade destination. If your problem output
route is pre-fader, then fader position will have no effect.
Is the Output Master Channel Path valid?
Almost exactly the same checks as above can be done on an output channel (Aux Sends, Master Output).
Run through the same checks as above but for the Output channel.
Is the Physical Output Valid?
Check the connection, and your replay system.
If metering is showing a valid output, it is likely there is a problem at, or after, the physical output.
81


Need help? Post your question in this forum.

Forumrules
1

Forum

soundcraft-ui16

Reset search

  • We use UI16 sound board inner little church. Unfortunately we also don't have very tech savvy people to operate it so Nour sound recording on livestream is poor quality, lots of background hissing and surge and sound of speaker too low.
    HELP!! Someone, please!!!! :) Submitted on 23-2-2022 at 17:01

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Soundcraft UI16 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Soundcraft UI16 in the language / languages: English as an attachment in your email.

The manual is 6,11 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info