Manual Soundcraft Signature 22MTK (page 38 of 55) (English)

611470

Zoom out

Zoom in

1/55

16, 22, 22MTK User Manual

5.1.3: FX RETURN CONTROLS

CHANNEL CONTROLS > FX RETURN CONTROLS

5.1.2: FX RETURN CONTROLS

A stereo FX Return channel is fed from the output of its internal

FX processor. The Signature 16 has one FX Return channel and

one FX processor. The Signature 22 and 22MTX have two. The

FX Return channel is a cut-down version of the normal stereo

channel, without trim, EQ, or an Aux send path back to its own

processor’s send bus (FX Return 1 does not have an Aux4/FX

send).

An example in use might be running a Reverb algorithm in the

processor (FX 1 for Signature 22 and 22MTX). Each individual

channel’s Aux 4/FX control will control how much of that source is

presentinthereverberanteldgeneratedbytheprocessor;the

FX return fader will then control the level of that whole reverberant

eldinthemixesitisroutedto(MainStereoBus,Group1-2,3-4).

FX send is always post-fade so an input channel’s contribution

tothatreverberanteldwillbeproportionaltothatchannel’s

contribution to a mix.

BAL

Adjust stereo balance for this channel

Adjusts the relative levels of the left and right signals for this channel, eectively adjusting the left-right position

of the overall stereo image when routed to MST. The balance is also adjusted across group pairs when the channel

is routed to groups 1-2 or 3-4.

GRP 1-2 / 3-4

Route the channel output to Group busses

The channel's PAN/BAL or BAL control determines the proportion of the signal across group pairs.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Soundcraft Signature 22MTK in the language / languages: English as an attachment in your email.

The manual is 7,04 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Soundcraft Signature 22MTK Manual

Product: