611467
13
Zoom out
Zoom in
Previous page
1/55
Next page
10, 12, 12MTK User Manual
2.1: CONSOLE INTRO
GETTING STARTED > INTRODUCTION TO MIXING CONSOLES
2.1: INTRODUCTION TO CONSOLES
The main function of a mixing console is to combine different audio inputs and independently adjust the levels
of those contributions to the mix. With this very basic functionality you can control and balance any kind of audio
from a one-man-band to an orchestra.
Most mixers however (including the Signature Series) offer far more than that. A variety of features allow the
operator to shape the mix, and use routing options to provide the additional conveniences used in audio mixing
applications, such as external effects sends, stage monitoring outputs, independant headphone monitoring, and
digital inputs and outputs.
Mix Faders
Faders make it easy to see and adjust relative levels. They allow you to visualise the mix.
Input Choice
All different microphones and instruments are catered for with mic, line, and Hi-Z input types / selections,
including 48V phantom power for powered (condenser / capacitor) microphones. The gain control allows you to
optimise the input level.
Equalisation
Examplesincludethehighpasslteronaninputtoreduceunwantedlowfrequencies,orthethree-bandEQ
(Equaliser) used for tonal ‘shaping’ of the source.
Dynamic Processing
This is audio processing that affects amplitude (volume). The Signature console includes a Limiter on selected
channels, which will prevent the input signal going too high, which would in turn cause distortion.
Output options
As well as mixing all the input (source) channel into one Master Stereo output, you can send particular
channels into additional group outputs, or create several different aux (auxiliary) mixes of all channels to send
to an FX (Effects) processor or stage monitor, for example. The headphone output allows the operator to listen
to the whole Main Mix, or to a selection of channels via the Solo System.
Solo / Monitor System
The solo system allows you to listen only to particular channels or busses through the headphones output, so
you can focus on a particular source without changing the mix.
Internal FX
FX (Effects) processing such as reverb, delay, chorus, phasing, and so on can be incorporated into a mixing
console so that you don’t have to invest in ‘outboard’ equipment or use up valuable physical inputs and outputs.
The Signature’s Lexicon FX processing can be applied in a controlled manner by using the Auxiliary 3/FX mix
and the dedicated stereo FX return channel.
Digital inputs and outputs.
Digital I/O is necessary to work with digital audio systems and computer-based Digital Audio Workstations.
The Signature series uses a USB interface for either 2-channel input/output (main or Aux 1-2 output), or for
multitrack input and output (MTK versions) with the USB inputs able to individually replace the input channel
sourceforaexible‘tapereturn’path.Forexample,theMTKfunctionalitycoulduseDAWplug-insasinsert
processing on selected input channels, or you could do a sound check with a dry recording of the band from a
previous gig... There are lots of ways to use this feature.
More Information
YoucanndoutmoreaboutindividualSignaturefeaturesbyreadingtherelevantsectionofthismanual.
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Soundcraft Signature 12MTK at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Soundcraft Signature 12MTK in the language / languages: English as an attachment in your email.

The manual is 6,38 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Soundcraft Signature 12MTK

Soundcraft Signature 12MTK User Manual - German - 54 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info