611464
33
Zoom out
Zoom in
Previous page
1/135
Next page
User Manual
5.2: DEFAULT PATCHING
INPUTS AND OUTPUTS > DEFAULT PATCHING
5.2: INPUTS & OUTPUTS > DEFAULT PATCHING
The default patching for Si Performer consoles - also shows default Fader Layers in brackets.
The console patching can be reset to default via the SYSTEM menu. VCA and DMX master assign-
ments are also shown for convenience, though there is no audio patching for these. For DMX Fader
Layers use ALT + A, B, C, or D FADERS buttons (see section 13).
Si Performer 1
• Mic In 1-14 > Input Channels 1-14 (Fader Layer A, slots 1-14).
• Mic In 15-16 > Input Channels 15-16 (Fader Layer B, slots 1-2).
• Unassigned inputs x 4 > Input Channels 17-22 (Fader Layer B, slots 3-6).
• Line Inputs 1-8 > Stereo Input Channels 1-4 (Fader Layer B, slots 7-10).
• Stereo FX Returns 1-4 > Stereo Inputs 5-8 (Fader Layer B, slots 11-14).
• MIXES 1-14 > Analogue Line Out 1-14 (Fader Layer C slots 1-14).
• MTX 1-4 > Not Assigned (Fader Layer D slots 1-4).
• Main L&R > Analogue Line Out 15-16 (Master L&R Fader).
• MONO > Not Assigned (MONO/SEL Fader).
• VCA Group Masters 1-8 > Not Assigned.
• DMX Masters A-D > (Fader Layer D, slots 11-14).
Si Performer 2
• Mic In 1-22 > Channels 1-22 (Fader Layer A, slots 1-22).
• Mic In 23-24 > Channels 23-24 (Fader Layer B, slots 1-2).
• Unassigned inputs x 12 > Channels 25-38 (Fader Layer B, slots 3-14).
• Line Inputs 1-8 > Channels Stereo Input Channels 1-4 (Fader Layer B, slots 15-18).
• Stereo FX Returns 1-4 > Stereo Input Channels 5-8 (Fader Layer B, slots 19-22).
• MIXES 1-14 > Analogue Line Out 1-14 (Fader Layer C slots 1-14).
• MTX 1-4 > Not Assigned (Fader Layer D slots 1-4).
• Main L&R > Analogue Line Out 15-16 (Master L&R Fader).
• MONO > Not Assigned (MONO/SEL Fader).
• VCA Group Masters 1-8 > (Fader Layer C slots 15-22)
• DMX Masters A-D > (Fader Layer D slots 19-22).
Si Performer 3
• Mic In 1-30 > Channels 1-30 (Fader Layer A slots 1-30).
• Mic In 31-32 > Channels 31-32 (Fader Layer B slots 1-2).
• Unassigned inputs x 20 > Channels 33-54 (Fader Layer B slots 3-22)
• Line Inputs 1-8 > Stereo Input Channels 1-4 (Fader Layer B slots 23-26).
• Stereo FX Returns 1-4 > Channels Stereo Input Channels 5-8 (Fader Layer B slots 27-30.
• MIXES 1-14 > Analogue Line Out 1-14 (Fader Layer C slots 1-14).
• MTX 1-4 > Not Assigned (Fader Layer D slots 1-4).
• Main L&R > Analogue Line Out 15-16 (Master L&R Fader).
• MONO > Not Assigned (MONO/SEL Fader).
• VCA Group Masters 1-8 > (Fader Layer C slots 15-22)
• DMX Masters A-D > Fader Layer D slots 27-30).
33


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Soundcraft Si Performer at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Soundcraft Si Performer in the language / languages: English as an attachment in your email.

The manual is 5,14 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info