611463
103
Zoom out
Zoom in
Previous page
1/132
Next page
User Manual
10.1.1: REVERB PARAMETERS
LEXICON FX > REVERBS > REVERB PARAMETERS
10.1.1: LEXICON FX > REVERBS > REVERB PARAMETERS
PRE DLY - Pre Delay
Adjust time delay between the source signal and the onset of reverberation.
This control is not intended to precisely mimic the time delays in natural spaces, as the build-up of reverberation is
gradual, and the initial time gap is usually relatively short. For the most natural eect, the Pre Delay values should
be set in the range of 10-25 milliseconds. However, if a mix is very busy or overly cluttered, increasing the Pre
Delay time may help clarify it, and set each instrument apart from each other.
Mid RT - Mid Range Reverb Time
Adjust the amount of time the mid-range reverb can be heard.
Higher settings increase reverberation times which are usually associated with larger acoustical environments,
but can decrease intelligibility. Lower settings shorten reverb times and should be used when a smaller apparent
space or a more subtle eect is desired.
ER Level - Early Reections Level
Adjust the level of early reections within the reverb.
ER Time - Early Reections Time
Adjust the amount of time before reverb early reections occur.
Size
Build-up rate of diffusion after the initial period (which is controlled by Diffusion).
The Size control changes reverb sound from very large to very small. Generally, set this control to the approximate
size of the acoustic space being created, before adjusting anything else. The size in meters is roughly equal to the
longest dimension of the space. Audio is temporarily muted when Size is changed.
RT High Cut
Rt HC sets the frequency above which a 6dB/octave low-pass lter attenuates the reverberated
signal.
It does not attenuate the reflections. High frequencies are often rolled o with this parameter, resulting in more
natural-sounding reverberation. Setting a low frequency for this parameter can actually shorten the reverb time,
as it damps the audio as it recirculates
103


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Soundcraft Si Impact at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Soundcraft Si Impact in the language / languages: English as an attachment in your email.

The manual is 10,12 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info