611463
93
Zoom out
Zoom in
Previous page
1/132
Next page
User Manual
SHOWS, CUELIST, SNAPSHOTS > SHOWS
9.1: SHOWS, CUELIST > SHOWS
LOAD
Initiate the Load Show process.
You can navigate the internal file system (MMC) or USB key (if present) and select a Show File to load by pressing
the APPLY button. The system will provide a warning that the action will overwrite the current show and allows
the action to be aborted.
SAVE AS
Initiate the process of saving the current show.
When you press SAVE, the QWERTY keyboard is shown with the current show name. You can continue the save
action with the current name (and overwrite) or change the name to create a new show file. Press APPLY to
confirm the name and navigate the file system to confirm the save location.
RESET CONFIG
Re-establish the system conguration.
Clears the console database of any option cards or external I/O systems that may have been attached to the
console then forces a ‘re-discovery’ of any installed option cards or connected I/O system, such as a Soundcraft
Stagebox. The system will provide a warning that the action will overwrite the current configuration database and
allow the action to be aborted.
Show Name
Name the current show.
Touching the value field will bring up a QWERTY keyboard for editing the name of the show. Press the APPLY
button to confirm.
Global Isolate Filters
Select and Isolate parameters from recall by the automation system.
If a parameter or group of parameters are set to 'Isolate', they will not be changed from the current setting when
a new snapshot is recalled, even if the snapshot has a dierent setting. Isolate settings for individual channels are
available via the INPUTS and OUTPUTS menus. NOTE: All parameters are saved with a snapshot, regardless of the
any Isolate settings.
Please note: There are also per-channel Isolates in the INPUTS & VCA and OUTPUTS menus.
9.1 SHOWS
93


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Soundcraft Si Impact at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Soundcraft Si Impact in the language / languages: English as an attachment in your email.

The manual is 10,12 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info