611463
41
Zoom out
Zoom in
Previous page
1/132
Next page
User Manual
6.1: INPUT CHANNELS
CHANNELS & BUSSES > INPUT CHANNELS
6.1: CHANNELS & BUSSES > INPUT CHANNELS
Input channels receive either external input from instruments, microphones, and so on, or they receive
input from the internal Lexicon FX units (FX Return - Stereo Input Channels 1-4).
Input channels can be mono (64 available: CH 01 - CH 64), stereo (4 available: ST 1 - ST 4 - FX Retunrs by default),
or mono-linked (assigned in odd/even stereo pairs of mono Input Channels), and can be patched to any microphone,
line, or digital inputs. Mono inputs do not have a FaderGlow colour. Mono-linked channels use FaderGlow white, and
Stereo FX returns from the internal FX units use FaderGlow cyan. If patched externally, stereo input channels use
FaderGlow pink
Input channels can contribute to any or all of the MIX 1-14 Mix busses (which feed the Mix Bus Master channels), the
Main L&R and Mono/Centre mix busses, or to the FX send busses - which get routed to the internal Lexicon FX. There
are three ‘taps’ for these bus contributions - Pre Dyn (Pre Dynamics), Post EQ, and Post Fader.
The levels of these contributions are accessed via the tOTEM buttons.
Please note, Input Channels can not contribute to the Matrix (MTX) busses, so the MTX FADER FOLLOW buttons are
not applicable for Control Channels assigned to Input Channels.
There are various input-specic options, found via the Touch Screen Main Menu INPUTS button. These offer
channel naming, linking, Pre/Post routing options for Mix busses and direct outputs, and physical input and Direct
Output patching. See section 6.1.1.
NOTE: For LCR Panning, LCR Panning Mode must be set in the INPUTS & VCA Menu. The Mono output patch is the
Centre output patch, and Mono routing must be enabled in the ACS (Assignable Channel Strip) OUTPUT section with
the MONO button (can be done in Interrogate mode for speed).
41


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Soundcraft Si Impact at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Soundcraft Si Impact in the language / languages: English as an attachment in your email.

The manual is 10,12 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info