611448

Soundcraft Si Expression Manual

125
Zoom out
Zoom in
Previous page
1/126
Next page
User Manual
APPENDIX 01: NO SOUND?
NO SOUND?
APPENDIX 01: NO SOUND?
Is the Gate shut?
It is possible for an incorrectly set Gate process to stop all signal.
This happens most often when the threshold is set too high and the signal never gets loud enough to 'open' the Gate. You can easily
check this by turn the Gate process o with the GATE button in the GATE section of the ACS (7.2.2).
If there is an Insert Point assigned, is the signal returned?
An insert point interrupts the signal ow by patching in a physical output and a physical input. If the signal is not
being returned at the Insert Return (or there is no Insert Return patch) then signal will stop there.
The easiest way to check is to check the INSERT page from the Touch Screen Main menu. If the problem channel has an Insert Point
assigned, check that both the Insert Send and Return for that Insert Point have valid patches and that the signal is being returned
(from an external processor, for example). //Reference section 5.1 has specific information on Insert patching.
Is the Channel on and unmuted?
If a Control Channel ON button is either not lit, or is illuminated red (part of an active Mute Group) then this will
mute the signal. Turn off the relevant Mute group or press the ON button to correct the problem.
The basic ON button operation is described in section 7.3, while Mute Groups are covered in section 8.1.
Is the Fader up?
The Fader need to be set high enough when routing to any post-fade destination. If your problem output route is set
pre-fader, then this will not affect anything.
You can check the Pre/Post routing of any Mix Bus from an Input Channel in the INPUTS menu - Per Mix Post/Pre (6.1.1).
Is the channel panned to a valid output?
If a signal is panned to the right and no right output exists - either because it isn't patched, or because there is
another problem with the right-hand path - then no signal will be heard.
Set Pan to the middle to make sure this isn't a problem.
… 125


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Soundcraft Si Expression at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Soundcraft Si Expression in the language / languages: English as an attachment in your email.

The manual is 4,77 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info