611474

Soundcraft MPMi Manual

39
Zoom out
Zoom in
Previous page
1/60
Next page
37Soundcraft MFXi MPMi User Guide Issue 1210
Diffusion
Controls the initial echo density. High settings of Diffusion result in high initial echo density, and low settings
cause low initial density. In a real-world situation, irregular walls cause high diffusion, while large at walls
cause low diffusion. For drums and percussion, try using higher Diffusion settings.
Shape
This control helps give a sense of both room shape and room size. Low values for Shape keep the majority
of sound energy in the early part of the reverb tail. High values move the energy to later in the reverb, and
are helpful in creating the sense of a strong rear wall or “backslap.
Boing
This is a unique parameter to the Spring reverb, designed to increase or decrease the amount of spring rattle
that is a physical characteristic of spring tank reverbs.
DELAYS
Delays repeat a sound a short time after it rst occurs. Delay becomes echo when the output is fed back
into the input (feedback). This turns a single repeat into a series of repeats, each a little softer than the last.
Studio Delay
The Studio Delay features up to 2.5 seconds of stereo delay and offers a built-in ducker that attenuates the
delay output whenever signal is present at the input. This can be used to keep the original signal from being
muddied up by delay repeats.
Digital Delay
The Digital Delay is the cleanest, most accurate of the delay programs, with up to 5 seconds of mono delay
and the built-in ducking feature.
Tape Delay
In the days before digital, delays were created using a special tape recorder in which the magnetic recording
tape was looped, with closely-spaced recording and playback heads. The delay effect was created by the tape
moving in the space between the record and playback heads – while delay time was adjusted by changing
the speed of the tape loop. Although very musical-sounding, wow and utter combined with a signicant
loss of high frequencies, and to some extent also low frequencies, are all elements commonly associated
with tape recordings. The Tape Delay offers up to 5 seconds of mono delay.
Pong Delay
This delay effect pans the delay repeats from left to right, while the input signal remains at its original (center)
position. Pong Delay offers up to 5 seconds of mono delay time.
Modulated Delay
The Modulated Delay is enhanced by an LFO (low frequency oscillator) that produces a chorusing effect on
the delay repeats. This is a great delay for guitar and instrument passages that need that “special something.”
The Modulated Delay features up to 2.5 seconds of stereo modulated delay.
Reverse Delay
This delay effect emulates the old studio trick of ipping a tape over, playing it backwards through a tape
delay, and recording the effect. The delays “build up” from softer to louder – creating the sensation that the
delays come before the signal. Up to 5 seconds of mono delay time are available.
… 39 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Soundcraft MPMi at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Soundcraft MPMi in the language / languages: English as an attachment in your email.

The manual is 2,32 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Soundcraft MPMi

Soundcraft MPMi User Manual - German - 35 pages

Soundcraft MPMi User Manual - French - 56 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info