611447
11
Zoom out
Zoom in
Previous page
1/48
Next page
5
EQ STAGE Adjust these controls to change the signal tone
6
AUX SENDS Adjust these controls to change the level of the signal to an FX unit or an artist’s monitors (head
phones/in-ear/stage monitors). Aux 1&2 are pre-fade, while Aux 3&4 are post-fade
7
PAN CONTROL Use this control to position the signal within the stereo field
8
MUTE SWITCH When this is pressed you will hear no signal from the channel
9
PFL (PRE-FADE LISTEN) When pressed the signal will appear on the monitor outputs - use this to monitor the post eq
signal from the channel
0
INPUT CHANNEL FADER This is used to control the level fed to the Mix Bus
q
DIRECT OUTPUT This output can be used to send the channel signal to a recording device, such as a multi-track
(¼” Jack) recorder
w
DIRECT PRE This switch controls the source for the direct output. When the switch is down the D/O is pre-fade,
and when the switch is up the D/O is post-fade
e
MIX OUTPUTS (XLR) Connect these to your analogue recording device, or to your amplification system
r
MIX INSERTS This is a pre-fade break in the signal path which can be used to feed a dynamics or mastering
(¼” Jack) device. The signal is sent from the tip of the jack plug and the return path comes back in on the
ring of the jack plug
t
S/PDIF OUTPUT This is a digital version of the Mix Output and can be used to send any source or the entire mix to
a digital recorder or computer sequencer via the appropriate hardware
y
MONITOR O/Ps These are used to feed your monitoring system. This can be directly to powered monitors, or
(¼” Jack) indirectly via an amplifier to standard monitors
u
MASTER FADER This fader controls the overall level of the mix bus
i
AUX MASTERS These controls can be used to adjust the overall level of a specific auxiliary send to an effects unit
o
MAIN METERS These show the level of the mix outputs. When the PFL/AFL LED is lit, the meters show the level of
the signal sourced
p
MONITOR CONTROL This controls the level of the signal sent to your monitoring system
a
PHONES CONTROL This controls the level of the signal sent to the headphones jack socket
s
MONO SUM CONTROL This controls the level of the signal sent to the mono sum output
d
AUX OUTPUTS These four outputs can be used to send the channel signal to an FX unit or an artist’s monitors
(¼” Jack) (headphones/in-ear/stage monitors). Aux 1&2 are pre-fade, Aux 3&4 are post-fade
f
STEREO RETURN INPUTS These four inputs can be used to connect the return signal from an FX unit, or a stereo feed from
(RCA Phono) consumer devices such as CD-Players, Minidisc etc. The level of these inputs are controlled by the
RET1,2,3 & 4 controls and are sub-mixed via the returns master control before being sent to the
Mix Outputs
g
STEREO INPUTS These four inputs can be used to connect line level stereo inputs from keyboards, sound modules,
(¼” Jack) samplers, computer based audio cards etc. These inputs pass through a normal channel strip,
with EQ, Auxes and a Balance control
h
PLAYBACK INPUT Here you can connect the playback from your recording device
(RCA Phono)
j
PLAYBACK CONTROLS Use this to control the level of the playback signal. There is also a PFL/AFL switch and a PLAYBACK
REPLACES MIX switch
k
RETURNS MASTER This controls the overall level of the stereo return inputs. There is also a MUTE switch so that you
can quickly compare your mix, with and without FX
l
PHANTOM POWER Press this to switch the phantom power (48V) on for condenser microphones
WARNING: Do Not apply Phantom Power before connecting a microphone
;
MIXER POWER LED This LED will light when the unit is switched on
z
HEADPHONES (¼” Jack) Plug your headphones into this socket
x
SIGNAL PRESENT LED This is used to indicate the presence of a signal on a specific channel
c
PEAK LED This is used to indicate signal clipping on a specific channel
v
MONO SUM OUTPUT This output provides a Mono sum of the main L & R mix outputs
b
100Hz FILTER When pressed, this switch significantly reduces the level of frequencies below 100Hz
9
17
18
16
18
22
25
22
22
21
21
21
21
22
20
19
19
22
21
22
21
21
27
18
18
22
17
22
17
17
18
18
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Soundcraft M12 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Soundcraft M12 in the language / languages: English as an attachment in your email.

The manual is 4,64 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Soundcraft M12

Soundcraft M12 User Manual - German - 44 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info