24771
20
Zoom out
Zoom in
Previous page
1/32
Next page
20
(15) Amp Clip LEDs
The red Amp Clip LEDs illuminate when the input levels to the internal
amplifiers are too high. It is acceptable for these LEDs to come on
momentarily every now and then but the Main or Monitor Master Volume
(depending on which signals have been routed to the amplifiers: see
(16) below) should be turned down if the Amp Clip LEDs illuminate
consistently.
NB! Continued use of the GigRac with the Amp Clip
LED illuminated could cause serious damage to your
GigRac and your loudspeakers!
(16) Internal Amplifier Source Select Switch
This switch determines which signals are routed to the internal power
amplifiers. The options are: Main L to amp 1, and Main R to amp 2, or,
Main L + R to amp1, and monitor to amp 2. See the diagram opposite.
(17) Main Output Meters
The dual 10-segment output meters show the signal levels being fed to
the internal power amplifiers. See (16) above.
It is best to aim to have the red 10dB LEDs lighting up regularly during
the loudest signals peaks playing through your GigRac and the 16dB
LEDs flicking on very occasionally. This will ensure that a good level is
passing through the mixer.
(18) Record Outputs
The Record Outputs (L & R) are for connecting a recording device such
as a cassette or mini disk recorder.
The signal output at the Record Output sockets is a post fade signal
derived from the Main Mix outputs. The amount of signal level leaving
the GigRac via the Record Outputs is determined by the Main Master
Volume control (10).
(19) Playback In
The Playback In connectors allow you to playback from your recording
device through the Main outputs/Speakers/Headphones. A useful tip is
to press the standby mute switch (20), this mutes all other inputs to
20


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Soundcraft Gicrac1000st at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Soundcraft Gicrac1000st in the language / languages: English as an attachment in your email.

The manual is 2,46 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info