611472
10
Zoom out
Zoom in
Previous page
1/40
Next page
10 GB8 User Guide
Fitting the GB8 Meterbridge
The meter bridge is packed at one end of the box, within a cut-out in the protective foam packing material. There are also 5 screws
provided in a bag.
Ensure that the GB8 is disconnected from the mains before fitting the meter bridge.
First you need to connect the ribbon cable.
Position the meter bridge as shown in Fig. 1 below. This will allow you to connect the meter bridge's ribbon cable to the matching
connector in the GB8. The ribbon cable may have been tucked up into the meter bridge for shipping; if it has, gently extend the
cable to its full length below the meter bridge before attempting to connect it.
When the claws are located in the
holes tip the meter bridge back to
its upright position. Ensure that the
ribbon cable hasn't been trapped.
See Fig.3.
Plug the ribbon cables connector into the matching
connector on the GB8. The connectors are shaped
so that you cannot connect them the wrong way
round. Ensure that the connectors are firmly pushed
together so that the contacts are correctly seated.
When you have connected the cable you will have
to tuck the excess length back into the meter bridge
otherwise it may get trapped between the meter
bridge and the top of the GB8.
Secure the back of the meter bridge to the GB8 using the five screws provided. See Fig. 4 below.
This completes the installation of
the meter bridge.
Next you need to assemble the
meterbridge to the GB8. Locate the metal
claws on the meter bridge into the
rectangular holes on the top of the GB8.
You will have to tip the meter bridge
forward to locate the claws. See Fig. 2.
Fig. 1
Fig. 2
Fig.3
Fig.4
GB8 User Guide
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Soundcraft GB 8 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Soundcraft GB 8 in the language / languages: English as an attachment in your email.

The manual is 2,1 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info