611452

Soundcraft EPM Manual

45
Zoom out
Zoom in
Previous page
1/60
Next page
43
Soundcraft EFX/EPM User Guide Issue 1210
Peaking The point at which a signal rises to its maximum instantaneous level, before falling
back down again. It can also describe an equaliser response curve affecting only
a band of frequencies, (like on a graphic equaliser), “peaking” at the centre of that
band.
Peak LED A visual indication of the signal peaking just before the onset of clipping, which will
distort the signal.
PFL Pre-fade listen: a function that allows the operator to monitor the pre-fade signal in
a channel independently of the main mix.
Phase A term used to describe the relationship of two audio signals. In-phase signals
reinforce each other, out-of-phase signals result in cancellation. Phase is a meas-
urement of relative displacement between two waves of identical frequency.
Polarity A term used to describe the orientation of the positive and negative poles of an
audio connection. Normally connections are made with positive to positive, nega-
tive to
negative. If this is reversed, the result will be out-of-phase signals (see ‘phase’
above).
Post-fade The point in the signal path after a fader and therefore affected by the fader
position.
Pre-fade The point in the signal path before a fader, and therefore unaffected by the fader
position.
Rolloff A fall in gain at the extremes of the frequency response.
Shelving An equaliser response affecting all frequencies above or below the break frequency
i.e. a highpass or lowpass derived response.
Spill Acoustic interference from other sources.
Transient A momentary rise in the signal level.
Unbalanced A method of audio connection which uses a single wire and the cable screen as the
signal return. This method does not provide the noise immunity of a balanced input
(see above).
+48V The phantom power supply, available at the channel mic inputs, for condenser
microphones and active DI boxes.
… 45 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Soundcraft EPM at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Soundcraft EPM in the language / languages: English as an attachment in your email.

The manual is 3,27 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info