812375
34
Zoom out
Zoom in
Previous page
1/48
Next page
34
6.8. - Anti Legionella
6.8.1. - AL T set
6.8.2. - AL residence time
This function is used to heat up the system during selected periods to eliminate legionella bacteria.
Settings range: S1-S8, VFS1-2, Active storage/ Default setting: none
This temperature has to be detected for the time set in AL residence time at the AL sensors for a successful heat up.
Settings range: 60-99 °C / Default setting: 70°C
This determines the time span for which the AL T set temperature must be detected for a successfull AL heat up.
Settings range: 1-120 min / Default setting: 60 min
Special functions
Relay functions
Relay functions
Caution
The anti-Legionella function is switched off at delivery.
Whenever heating-up has been carried out with the anti-Legionella function switched on, an information
message with the date appears on the display.
During the anti-Legionella function the storage tank is heated up over the set value “Tmax S(X)”, which
can lead to scalding and damage to the system.
Danger
This anti-Legionella function does not provide complete protection against Legionella, because the cont-
roller is dependent on suf cient energy being fed in, and it is not possible to monitor the temperatures in
the entire range of the storage tanks and the connected piping system. To provide complete protection
against Legionella bacteria, it must be ensured that the temperature is raised to the necessary tempe-
rature, and at the same time there must be water circulation in the storage tank and piping system by
means of other additional energy sources and external control units.
Caution
6.8.3. - Last AL heat
6.8.4. - AL sensor 1
This displays the date and time of the last successful heat up.
No settings
This temperature is used to measure the AL temperature.
Settings range: S1-S8, VFS1-2, Active storage/ Default setting: none
6.8.5. - AL Sensor 2
Optional AL sensor
When a second sensor is connected, both sensors must reach and hold the setpoint temperature for the residence
time for a successful heat up.
Settings range: S1-S8, VFS1-2, Active storage/ Default setting: none
6.8.6. - AL-times
During this periods the AL heat up is attempted.
Setting range: from 00:00 to 23:59 /default setting: 06:00 to 22:00
34


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sorel XTDC at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sorel XTDC in the language / languages: English as an attachment in your email.

The manual is 1.73 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Sorel XTDC

Sorel XTDC User Manual - German - 48 pages

Sorel XTDC User Manual - French - 48 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info