812440
20
Zoom out
Zoom in
Previous page
1/24
Next page
20
5.4. - Sensor calibration
Caution
Caution
Settings sind nur in Sonderfällen bei Erstinbetriebnahme durch den Fachmann nötig.
Falsche Messwerte können zu Fehlfunktionen führen.
Starting the commissioning help guides you in the correct order through the basic settings necessary for
commissioning, and provides brief descriptions of each parameter in the display.
Pressing the “esc” key takes you back to the previous value so you can look at the selected setting again
or adjust it if desired. Pressing the “esc” more than once takes you back to the selection mode, thus
cancelling the commissioning help.
5.5. - Commissioning
May only be started by a specialist during commissioning! Observe the explanations for
the the individual parameters in these instructions, and check whether further settings are
necessary for your application.
Deviations in the temperature values displayed, for example due to cables which are to long or sensors
which are not positioned optimally, can be compensated for manually here. The settings can be made for
each individual sensor in steps of 0.8°C (temperature) resp. 0.2% of the measuring range of the VFS / RPS
sensor (ow rate / pressure) per step.
O󰀨set Sensor Settings range: -100 ... +100 / Default setting: 0
Caution
All of the settings that have been made can be reset, thus returning the controller to its delivery state.
5.6. - Factory settings
The entire parametrisation, analyses, etc. of the controller will be lost irrevocably. The
controller must then be commissioned once again.
Special functions
Caution
This menu is used to set the current time and date.
When this function is active, the controller’s clock changes automatically to and from DST (DST, Daylight
Savings Time).
5.7. - Time and date
5.8. - Daylight saving time
For analysis of the system data it is essential for the time to be set accurately on the
controller. Please note that the clock does not continue to run if the mains voltage is
interrupted, and must therefore be reset.
When active, the displays backlight is switched o󰀨 after 2 minutes of inactivity.
5.9. - Eco display mode
Caution
If a message is waiting, the backlight is not switched o󰀨.
20


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sorel WMC at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sorel WMC in the language / languages: English as an attachment in your email.

The manual is 1.69 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Sorel WMC

Sorel WMC User Manual - German - 24 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info