812383
32
Zoom out
Zoom in
Previous page
1/48
Next page
32
Settings
5.10 Priority sensor
Charging priority in systems with two storage tanks
A setting must be made as to which storage tank (storage tank sensor) has priority for
charging. Charging of the lower-priority storage tank is interrupted at regular intervals
to check whether the temperature increase at the collector can enable charging of the
higher-priority storage tank.
Setting range: S2 or S3/default setting: S2
5.11 T priority
Temperature threshold for absolute priority
In systems with two storage tanks charging of the lower-priority storage tank will never
take place until this temperature at sensor of the higher-priority storage tank is ex-
ceeded.
Setting range: from 0°C to 90°C/default setting: 40°C
5.13 Increase
Extension of the charging pause due to temperature increase in the collector
For precise setting of the charging priorities for systems with multiple storage tanks,
the necessary temperature increase of the collector at which the interruption of the
charging into the lower-priority storage tank is extended by one minute is set here. The
interruption is extended because the temperature increase of the collector is expected
to enable charging in the higher-priority storage tank soon.
As soon as T conditions are met, the priority storage tank is charged. If the rise in
temperature falls below the set value, then the charging of the lower-priority storage
tank is enabled again.
Setting range: from 1°C to 10°C/default setting: 3°C
5.12 Loading time
Interruption of charging into the lower priority storage tank
The charging of the lower-priority storage tank is interrupted after the settable time
in order to check whether the collector has reached a temperature level that allows
charging in the higher-priority storage tank. If so, the priority storage tank is charged.
If not, the increase is measured (see 5.13), to check if charging of the priority storage
tank will be possible shortly.
Setting range: from 1 to 90 minutes/default setting: 10 minutes
5.14 Thermostat periods
Thermostat activity times
Set the desired periods of time when the thermostat should be active. 2
periods can be set per day, settings can also be copied to other days.
Outside the set times the thermostat is switched off.
Setting range: from 00:00 to 23:59 /default setting: 06:00 to 22:00
32


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sorel TDC 2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sorel TDC 2 in the language / languages: English as an attachment in your email.

The manual is 1.21 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Sorel TDC 2

Sorel TDC 2 User Manual - German - 48 pages

Sorel TDC 2 User Manual - Dutch - 48 pages

Sorel TDC 2 User Manual - French - 48 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info