812388
14
Zoom out
Zoom in
Previous page
1/23
Next page
In the delivery state, the anti legionella function is switched off.
As soon as it has heated up with “AL turned on, information with the date will be shown in the display.
This anti legionella function does not offer any secure protection against legionella, because the controller requires an
adequate added amount of energy and the temperatures cannot be monitored in the entire storage area and the connected
pipe system. For secure protection against legionella, a heating up to the requried temperature as a well as a simultaneous
circulation of water in the storage and pipe system must be guaranteed through energy sources and external control
devices.
During the operation of the anti legionella function, if applicable, the storage is heated above the set value “Tmax”, which
may lead to scalding and system damage.
AL Tset
For a successful heating, this temperature has to be reached at the AL sensor(s) for the exposure time period.
AL residence time
For this period of time the AL Tsettemperatures at the activated AL-sensors have to be reached for a successful heating.
Last AL heat
This displays when the last successful heating has occurred.
AL-times
During this periods the AL heat up is attempted. If within the defined period, the AL-condition is met (Tset at the defined sensors for the
exposure time period), the heating is completed and logged as "Last AL heating".
Start manually
The anti-Legionella heating can be started manually at any time.
Seizing Protection
If the anti-seizing protection is activated (daily, weekly, off), the controller switches the heat pump and the mixer on/off at 12:00 noon
for 5 seconds to prevent seizing of the pump/valve after long periods of inactivity.
6. Special Functions
Used to set basic items and expanded functions.
The settings in this menu should only be changed by a specialist.
Program selection
Here the hydraulic variation fitting to the respective use case is selected and set.
The program selection normally occurs only once during the first entry into service by a specialist. An incorrect program
selection may lead to unpredictable errors.
Pump settings / Signal V1
In this menu, the settings for the speed controlled output V1 are executed.
14
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sorel SLC at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sorel SLC in the language / languages: English as an attachment in your email.

The manual is 3.76 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Sorel SLC

Sorel SLC User Manual - German - 21 pages

Sorel SLC User Manual - Dutch - 36 pages

Sorel SLC User Manual - French - 22 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info