812387
28
Zoom out
Zoom in
Previous page
1/36
Next page
28
6.4. - Sensor calibration
Deviations in the temperature values displayed, for example due to cables which are to
long or sensors which are not positioned optimally, can be compensated for manually
here. The settings can be made for each individual sensor in steps of 0.5°C.
6.5. - Commissioning
Starting the commissioning help guides you in the correct order through the basic set-
tings necessary for commissioning, and provides brief descriptions of each parameter
in the display. Pressing the “esc” key takes you back to the previous value so you can
look at the selected setting again or adjust it if desired. Pressing the “esc” more than
once takes you back to the selection mode, thus cancelling the commissioning help.
(see also 5.1)
6.6. - Factory settings
All of the settings that have been made can be reset, thus returning the controller to its
delivery state.
Special functions
6.7. - Time & Date
This menu is used to set the current time and date.
Caution
Settings are only necessary in special cases at the time of initial commissioning
by the specialist. Incorrect measurement values can lead to unpredictable errors.
Caution
May only be started by a specialist during commissioning! Observe the ex-
planations for the the individual parameters in these instructions, and check
whether further settings are necessary for your application.
Caution
The entire parametrisation, analyses, etc. of the controller will be lost irrevocably.
The controller must then be commissioned once again.
For proper functioning of the controller and statistics for the system data it is
essential for the time to be set accurately on the controller. Please note that
the clock continues to run for about 24 hours if the mains voltage is interrupted,
and after that has to be reset.
Caution
28


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sorel SFWC at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sorel SFWC in the language / languages: English as an attachment in your email.

The manual is 2.5 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Sorel SFWC

Sorel SFWC User Manual - German - 34 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info