Manual Sorel MHCC (page 20 of 24) (English)

812335

Zoom out

Zoom in

1/24

Room Controller

This value is used to appoint the amount of influence the room temperature has on the reference flow temperature, as a per-

centage. For every degree of the room temperature deviates from the reference room temperature, the percentage of the cal-

culated reference flow temperature set here is added to or subtracted from the reference flow temperature, so long as it is within

the limits of the min. and max. flow temperatures that can be set in the protective functions.

Example: Reference room temp.: e.g. 25 °C; room temp.: e.g. 20 °C ±5 °C. Calculated reference temp.: e.g. 40 °C: room con-

troller: 10 %= 4 °C 5 X 4 °C= 20 °C. Accordingly, 20 °C are added to the reference flow temperature, giving 60 °C. If the value is

higher than the one set in max. flow temp, the resulting temperature is the one set in max. flow temp.

Room Reference (Day)

The desired room temperature for day mode. As long as this temperature is not reached, the reference flow temperature is raised

and/or lowered according to the percent setting in ‚room controller‘. If ‚room controller‘ is set to 0 %, this function is deactivated.

Room Reference (Night)

The desired room temperature for night mode. As long as this temperature is not reached, the reference flow temperature is

raised and/or lowered according to the percent setting in ‚room controller‘. If ‚room controller‘ is set to 0 %, this function is deac-

tivated.

In the modes ‚Set point‘ and ‚Set point program, the room controller has no influence.

Thermostat

The room controller is set here. If no RC21 is connected, a room controller from another heating controller over can be selected

over the CAN bus. The CAN bus ID of controller is shown in Menu 6, ‚Service Data‘ under ‚CAN Bus ID‘. Choose the RC21 with

the CAN Bus ID of the corresponding controller. The heat controller now obtains the switch position and rotary switch position

from the CAN bus.

Eco Display Mode

In Eco Display Mode the backlight of the display is switched off if no buttons are pushed for 2 minutes.

If a message exists, the backlight does not switch off until the message has been scanned by the user.

Network

If applicable, the network settings of the connected data logger have to be adjusted

Access Control

This menu lets you give up to 4 users access to the data logger. The users that are registered then have access to the controller

or respectively the data logger.

To add a user in the list, select <add user>. Leave the now visible menu open und connect to the address of the connector or

respectively the data logger. Your user name is going to appear in this menu and can be selected and confirmed with ‘OK’.

Note

You can find the address of the connector or respectively the data logger on the address sticker on the outside of the casing.

Pointers and help on how to establish a connection you can find in the enclosed SOREL connect instructions or the instructions

of the data logger.

Select a user with ‘OK’ to grant access.

To revoke access again, choose one of the users from your list and choose <remove user>.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Sorel MHCC in the language / languages: English as an attachment in your email.

The manual is 3.18 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Sorel MHCC

Sorel MHCC User Manual - German - 24 pages

Sorel MHCC User Manual - French - 36 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Sorel MHCC Manual

Product: