812374
43
Zoom out
Zoom in
Previous page
1/50
Next page
If a message exists, the backlight does not switch off until the message has been scanned by the user.
Temperature unit
In this menu you can select between the temperature units °C and °F.
Network
If necessary, the network settings of the connected data logger must be set.
Access Control
This menu lets you give up to 4 users access to the data logger. The users that are registered then have access to the controller or respect-
ively the data logger.
To add a user in the list, select <add user>. Leave the now visible menu open und connect to the address of the connector or respectively
the data logger. Your user name is going to appear in this menu and can be selected and confirmed with ‘OK’.
Note
You can find the address of the connector or respectively the data logger on the address sticker on the outside of the casing. Pointers and
help on how to establish a connection you can find in the enclosed SOREL Connect instructions or the instructions of the data logger.
Select a user with ‘OK’ to grant access.
To revoke access again, choose one of the users from your list and choose <remove user>.
Ethernet
The data logger‘s Ethernet connection settings can be set using this menu.
MAC Address
Displays the individual MAC address of the data logger.
Auto-Configuration (DHCP)
If auto-configuration is activated, the data logger requests IP addresses and network parameters from a DHCP server that assigns an IP
address, subnet mask, gateway IP and DNS server IP. If you deactivate the auto configuration (DHCP), you will have to make the
required network settings manually!
IP-Address
Please refer to the router configuration for the IP address to be set.
Subnet Mask
Please refer to the router configuration for the subnetz mask to be set.
Gateway
Please refer to the router configuration for the gateway to be set.
DNS-Server
Please refer to the router configuration for the DNS server to be set.
CAN bus ID
Here you can see the ID of the controller on the CAN bus.
Sensor send interval
The send interval determines how often the sensor and output values of the controller may be send via CAN. If a value changes, it is sent
and starts the interval. The next values are not sent until the interval has expired. If no value changes, nothing is sent.
If there are several controllers in the CAN network, a too short send interval can lead to an overload of the CAN network.
43


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sorel LTDC at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sorel LTDC in the language / languages: English as an attachment in your email.

The manual is 5.41 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Sorel LTDC

Sorel LTDC User Manual - German - 50 pages

Sorel LTDC User Manual - Dutch - 36 pages

Sorel LTDC User Manual - French - 36 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info