812390
32
Zoom out
Zoom in
Previous page
1/40
Next page
32
6.10. - Sensor calibration
Deviations in the temperature values displayed, for example due to cables which are to
long or sensors which are not positioned optimally, can be compensated for manually
here. The settings can be made for each individual sensor in steps of 0.5°C.
Caution
Settings are only necessary in special cases at the time of initial commissioning
by the specialist. Incorrect measurement values can lead to unpredictable errors.
Special functions
6.8. - Signal V2
With this function the PMW/0-10V output 2 is used for an additional
high-e󰀩ciency pump. If a pump function is activated (e.g. circulation), additional parameters
for pump settings V2 and V2 speed -control have to be set. For other functions (e.g. zone
valve) the output signal switch from 0 to 10 V. For other switching variants an additional relay
box can be used to switch a potential-free relay at this output.
Please note the technical information about the PMW/0-10V outputs
(„B.1 -. Specications“ on page 6).
6.8.1. - Signal V2
See „6.5. - Relay functions 1
6.9. - Pressure monitor
6.9.1. - Pressure monitor
The relay is switched on when the pressure drops below set minimum or exceeds the
set maximum pressure.
6.9.2. - RPS1 / RPS2
Type of pressure sensor
This menu is used to determine the type of pressure sensor used.
Please note: If e.g. VFS1 is connected, RPS1 option is not shown.
6.9.3. - Pmin
Minimum pressure. If this value is undershot, an error message is displayed and the
relay is switched on.
6.9.4. - Pmax
Maximum pressure. If this value is exceeded, an error message is displayed and the
relay is switched on.
This menu is used to congure the system pressure montoring via direct sensor. As
soon as the set limits are exceeded, the relay is switched on.
See „6.5. - Relay functions 1
6.7. - Relay 3
32


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sorel LFWC at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sorel LFWC in the language / languages: English as an attachment in your email.

The manual is 2.23 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Sorel LFWC

Sorel LFWC User Manual - German - 28 pages

Sorel LFWC User Manual - French - 38 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info