812346
23
Zoom out
Zoom in
Previous page
1/36
Next page
23
Settings heat circuit
Switch-off hysteresis for additional heating (only when S3 is connected)
This settings determines the allowed overstepping of the heat circuit temperature
to the calculated reference ow temperature at sensor 3. If the temperature at S3
exceeds the reference ow temperature by this value, the additional heating (R5) is
switched off.
Settings range: 1°C to 10°C / Default: 2°C
5.1.8. - Reference/actual +
Caution
When sensor 3 is not connected, additional heating at relay 5 is switched off
when sensor S2 reaches or exceeds the reference ow temperature.
Caution
To prevent unnecessary activation of additional heating it is recommended to in-
stall sensor 3 in the storage on the same level (or higher) as the heat circuit exits..
Delay of additional heating and cooling
To prevent excessive oscillation when additional heating or cooling start, the corre-
sponging relay is switched on up to 5 minutes after the switch-on conditions are met.
Settings range: 0 to 5 minutes / Default: 1 minute
5.1.9. - Delay
Delay applies to cooling and heating (see 5.2.8).
This setting is the lower limit for the characteristic curve, thus the low limit for the heat
circuits reference temperature.
Additionally this is the reference temperature for the frost protection function.
Settings range : 5°C to 30°C / Default: 15°C
5.1.10. - min. ow (heating)
This settings is the upper limit for the heat circuit reference temperature.
If the heat circuit exceeds this value, it is switched off until the temperature drops
below.
Settings range: 30 °C to 105 °C / Default: 45 °C
5.1.11. - max. ow (heating)
The user has to install an additional security temperature limiter / limiter
thermostat, that has to be connected in series with the pump.
Caution
Caution
23


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sorel HCC6 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sorel HCC6 in the language / languages: English as an attachment in your email.

The manual is 0.71 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Sorel HCC6

Sorel HCC6 User Manual - German - 36 pages

Sorel HCC6 User Manual - French - 40 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info