812346
9
Zoom out
Zoom in
Previous page
1/36
Next page
9
C.2. - Electrical connection
Before working on the unit, switch off the power supply and secure it
against being switched on again!
Check for the absence of power!
Electrical connections may only be made by a specialist and in compli-
ance with the applicable regulations. The controller may not be put into
operation if there is visible damage to the housing, e.g. cracks.
Caution
Danger
Low-voltage cables such as temperature sensor cables must be routed
separately from mains voltage cables. Feed temperature sensor cables
only into the left-hand side of the unit, and mains voltage cables only
into the right-hand side.
The cables being connected to the unit must not be stripped by more
than 55mm, and the cable jacket must reach into the housing just to the
other side of the strain relief.
The customer must provide an all-pole disconnecting device, e.g. a
heating emergency switch.
Caution
Caution
1.Open controller housing (see C.1)
2.Strip cables max. 55mm, insert, t the
strain relief devices, strip the last 8-9 mm
of the wires. (Fig.C.2.1)
3. Open the terminals using a suitable
screwdriver (Fig. C.2.1) and make electrical
connections on the controller (Pages 11)
4. Re t upper part of housing and fasten with
screw.
6. Switch on mains voltage and place con-
troller in operation
Installation
C.2.1.
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sorel HCC6 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sorel HCC6 in the language / languages: English as an attachment in your email.

The manual is 0.71 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Sorel HCC6

Sorel HCC6 User Manual - German - 36 pages

Sorel HCC6 User Manual - French - 40 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info