812343
27
Zoom out
Zoom in
Previous page
1/32
Next page
27
12.9 Room controller Menu 7.6
Special functions Menu 8
12 12
12.9.1 Room controller Menu 7.6.1
12.9.2 Room reference day Menu 7.6.2
The desired room temperature for day mode. As long as this temperature is
not reached, the reference ow temperature is raised or respectiveley lowered
according to the percent setting in “room controller”. If “room controller” is set
to 0%, this function is deactivated.
Settings range: 10 °C to 30 °C / Default: 20 °C
12.9.3 Room reference night Menu 7.6.3
The desired room temperature for night mode. As long as this temperature is
not reached, the reference ow temperature is raised or respectiveley lowered
according to the percent setting in “room controller”. If “room controller” is set
to 0%, this function is deactivated.
Settings range: 10 °C to 30 °C / Default: 20 °C
The settings necessary for the optional room controller RC21 are made in this
menu.
The 3 modes “continous day”, “continous night” and “Time controlled/automatic”
can be switched at the RC21.
Additionally the reference temperature of the ow can be parallel translated by
turning the control wheel. If the wheel is set to minimum, only the minum values
that can be set in the protective functions menu will be used.
This value is used to appoint the amount of in uence in percent the room
temperature has on the reference ow temperature. For every degree of
deviation of the room temperature from the reference room temperature the
percentage of the calculated reference ow temperature set here is added to
or, respectively, subtracted from the reference ow temperature. As long as
it is within the limits of the min. and max. ow temperatures that can be set in
the protective functions.
Example: Reference roomtemp.: e.g. 25 °C ; room temp.: e.g. 20 °C = 5 °C
deviation.
calculated reference temp..: e.g. 40 °C : room controller: 10 % = 4 °C
5 X 4 °C = 20 °C According to this 20 °C are added to the reference ow
temperature, resulting in 60 °C. If the value is higher than the one set in max.
ow temp-, the resulting temperature is only the one set in max. ow temp.
Settings range: 0 % to 20 % / Default: 0
Caution
In the operating modes “Reference value” and 14day ref.” the remote
adjuster is without function.
27


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sorel HCC3 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sorel HCC3 in the language / languages: English as an attachment in your email.

The manual is 1.63 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Sorel HCC3

Sorel HCC3 User Manual - German - 32 pages

Sorel HCC3 User Manual - French - 33 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info