812343
22
Zoom out
Zoom in
Previous page
1/32
Next page
22
10.4 Day correction Menu 5.4 = parallel translation of the characteristic
The day correction produces a parallel translation of the heating
characteristic during the daytime operating hours, since depending on the
outdoor temperature it is possible that the building may not be optimally
heated with the set characteristic. If the characteristic is not optimised, the
following situation may occur:
in hot weather - the spaces are too cold
in cold weather - the spaces are too hot
In this case, one should gradually reduce the characteristic slope in steps
of 0.2, each time raising the day correction by 2-4 °C.
This procedure can be repeated several times as needed.
Setting range: from -10°C to 50°C / default setting: 5
10.5 Night correction Menu 5.5 = parallel translation of the characteristic
The night correction produces a parallel translation of the heating
characteristic during the nighttime operating hours. If a negative value
is set for the night correction, the reference ow temperature is lowered
accordingly during the nighttime operating hours. In this manner, primarily
at night, but also during the day when no-one is at home, the room
temperature is lowered, thus saving energy.
Example: A day correction of +5°C and a night correction of -2°C produces
a reference ow temperature in nighttime operation that is 7°C lower.
Setting range: from -30°C to 30°C / default setting: -2°C
10.6 Comfort temperature boost Menu 5.6 = parallel translation of the
characteristic
The comfort temperature boost is added to the set day correction. In this
manner it is possible to carry out quick heating and/or a higher temperature
in the living spaces at a certain time each day.
Setting range: from 0°C to 15°C / default setting: 0°C = off
Settings Heat circuit Menu 5
10 10
10. Settings HC (continued)
The following settings can be used for parallel translation of the
characteristic for certain time periods such as daytime and nighttime
mode.
Caution
22


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sorel HCC3 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sorel HCC3 in the language / languages: English as an attachment in your email.

The manual is 1.63 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Sorel HCC3

Sorel HCC3 User Manual - German - 32 pages

Sorel HCC3 User Manual - French - 33 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info