812369
2
Zoom out
Zoom in
Previous page
1/2
Next page
SOREL GmbH Mikroelektronik | Reme-Str. 12 | D - 58300 Wetter (Ruhr) | +49 (0)2335 682 77 0 | info@sorel.de | www.sorel.de | 20.07.2023
Measured values IAQ and CO2 equivalent
In the first few days after installation, the °C-Lite Clima Smart goes through a calibration phase during which fluctuating measurements and major deviations may occur.
CO2 Air quality IAQ Air quality*
< 800 ppm Excellent 0 - 100 Good
800 - 1000 ppm Good 101 - 150 Moderate
1000 - 1400 ppm Satisfactory 151 - 200 Unhealthy for sensitive groups of people
1400 - 2000 ppm Medium (ventilation recommended) 201 - 250 Unhealthy
2000 - 3000 ppm Bad (ventilation required) 251 - 300 Very unhealthy
> 3000 ppm Very (ventilation required) 301+ [LED flashes high-frequency] Hazardous to health
* The faster the LED flashes, the poorer the air quality
Operation
Standby Screen
IAQ ok (°C-Lite Clima Smart) Touching
the touch areas activates "Display".
Measuring unit and measured value display
The first touch of the touch area shows the temperature. Repeated touching changes to other
measured values and first shows the unit and after a short time the measured value.
Setpoint adjustment
The set temperature can be reduced or increased
by touching the blue and red touch areas.
°C-Lite Smart / °C-Lite Clima Smart room assignment
There are two ways to assign a room to the °C-Lite Smart / °C-Lite Clima Smart:
1. Using the device ID via the °CALEONmenu 'Expert -> Settings -> Rooms -> Room X -> Temperature/ Humidity
2. As described under 1. via the °CALEON menu in combination with the Touch-To-Assign function (T2A) on the °C-Lite.
Expert> Settings >
Rooms
Select or add room Select sensor type
Temperature /
Humidity
Assign sensor Assignment successful
When opening the
sensor list, the °C-Lite
automatically switches
to T2A mode
Touch the °C-Lite on
one of the three touch
areas to assign it to the
selected room.
LED lights up blue
while the connection is
being established.
LED lights up green if
the assignment was
successful.
Assignment successful
Set room setpoint
1. Activate the room setpoint menu (1) by touching the touch area (1).
Reduce (2) or raise (3) the room setpoint by touching the touch areas.
After 20 seconds, the display returns to the standby screen.
The set room setpoint is valid until the next change via °CALEON timer or manually.
2


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sorel C-Lite Smart T2A at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sorel C-Lite Smart T2A in the language / languages: English as an attachment in your email.

The manual is 0.67 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Sorel C-Lite Smart T2A

Sorel C-Lite Smart T2A User Manual - German - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info