Help Guide
Wireless Noise Canceling Stereo Headset
LinkBuds S
Turning on the headset
When the headset is set into the charging case
When the headset is not set into the charging case
When the headset is not worn in your ears for about 15 minutes after being removed from the charging case, the
headset turns off automatically. In this case, turn the headset on by tapping the touch sensor of the headset or by putting
the headset into your ears. The headset will also turn on when it is set into the charging case and then removed from the
charging case.
By using the “Sony | Headphones Connect” app, you can change the setting of the headset so that it will not be turned
off automatically.
When the headset is turned on
When both headset units are removed from the charging case, the connection between the left and right units of the
headset is established.
When you use the headset for the first time after purchase or just after initializing the headset, the headset goes into
Bluetooth pairing mode automatically when you put the headset units into both ears.
When you use the headset for the first time after purchase or just after initializing the headset, the noise canceling
function is turned on automatically when you put the headset units into your ears. If the noise canceling settings were
changed previously, the settings are retained.
Related Topic
Using only one unit of the headset
Turning off the headset
What you can do with the “Sony | Headphones Connect” app
5-035-792-11(2) Copyright 2022 Sony Corporation
Remove the headset from the charging case.
The headset turns on automatically.
When you remove only one unit from the charging case, only the removed unit turns on.
1
