Cleaning the holes of the charging case
Clean the holes where the earbud tips fit with a cotton swab, etc.
E: Holes of the charging case (left, right)
Drying the headset
After cleaning is complete, leave the headset to dry thoroughly in room temperature.
Note
When drying the headset, if the IR sensors touch the table, the headset will be considered worn and the rechargeable
battery may continue to be consumed. Place the headset units with the IR sensors facing sideways or upwards.
Cleaning the noise isolation earbud tips
When the noise isolation earbud tips become dirty, wipe off the dirt with a dry cloth, etc.
If foreign material such as earwax becomes attached to the mesh part of the earbud tip, the sound may become
muffled or difficult to hear.
Remove the earbud tip from the headset, apply a cotton swab lightly to the mesh part, and rotate the cotton swab
slowly to wipe off the dirt. Be careful not to tear the mesh part.
Note
Earbud tips are consumables.
When the earbud tips get soaked, drain the liquid well, and make sure that the earbud tips are dried before use or storage.
Avoid washing with water, wet wipes, and the use of organic solvents such as alcohol, as these can cause premature
deterioration.
